repaste

Hi all, I recently repadded and repasted my Aorus 3090 Xtreme since it was very loud and the core would nearly reach 90 degrees c in 80+% load, so worried for the longevity, I redid the pads and paste. I followed a users comment as to which pads to buy and thicknesses. I used GELID Ultimate 2mm...

Hi! I got a second hand 3080 Gundam ROG, not used in mining, some corrosion in the fins. Seller repasted it March 2023, thermal pads wasn't changed. I was able to use it for 2+ weeks without any problems, temps around 81⁰C max on max cyberpunk game settings stable 55+fps, then I decided to check...

Hi guys, i bought from ebay a RTX 3070 Gainward Phantom GS for a very very good deal. Card is used for a few months and should have warrantly left. I tested it in some lite games in 1080p 60hz (i need to switch monitor) and was fine. When the card reaches 80/90% utilization temps spikes to...

So I decided yesterday to go bonkers, & buy the Asus Strix RTX 3090.. My question now is, I already know myself & I will want to repaste & repad the graphics card But I'm having trouble finding any sugestions about pad size & best paste to use.. Lastly I know allot of people my ask why do this...

To start with, I want to state that before doing any of this, my GPU was perfectly fine, with no odd behavior whatsoever. I've recently bought a used graphics card (yes, I know) as my previous one had died and I obviously needed a replacement since I couldn't live with a gt 730. Despite it...

Does somebody know what's the correct and different thickness I need for GIGABYTE RX 570 GAMING GV-RX570GAMING-4GD https://www.techpowerup.com/gpu-specs/gigabyte-rx-570-gaming.b4442 Planning to clean and repaste it, it's a recently purchased used card. It seems the info is quite hard to find...

Hi, here's my gaming laptop specs: ASUS ROG SCAR II GL504GW CPU: i7-8750H GPU: RTX 2070 RAM: 16GB DDR4 2666 MHz I have also previously undervolted my CPU to a stable level using Throttlestop and have MSI Afterburner installed but I didn't bother tweaking any of the values there since I purely...

Hi, i have some problem here. Since yesterday, my computer ran slower than before, and it's disturb my productivity. Today i downloaded a software to check my CPU temperature and it's sowing almost 60 degrees celcius in idle. And my question is same as title, should i repaste my CPU? Full...

So the i9-10980hk my laptop has is currently throttled and i think with a repaste i can gain a little more performance, other people with the same laptop have confirmed this. Many people have told me that LM isn't worth the risk, is this right? Also I have looked at pads but they don't seem to...

I have an Acer Predator Helios 300 (PH315-51-50ST) since start of 2019. There have been thermal issues/throttling since the beginning, especially when playing games. Undervolting had initially helped to keep the temps somewhat manageable (70-80C) under load. However recently it has been...

View: https://i.imgur.com/vS8mAQp.jpg This is how it looks like now.

Howdy guys, I'm planning to apply a liquid metal (Conductonaut) in my Asus GL504GW, because it's not rare for the CPU to go up to 95 °C and TT. I've already done a repaste with a MX-4 which yes, decreased the temps by 5-10 °C, but it's still not good enough. The heatsink is of a compatible...

I got the Y730 a few months back and everything was great. Recently I've experienced this problem were the laptop restarts while gaming, even 5 minutes into it. My temperatures stay around 70 degree but it still does this, I'm able to increase the time by turning of the better battery mode but...

I have a Dell G7 7588 gtx 1060 model I bought it for gaming but it keeps overheating, I searched online and have tried everything from downvolting,throttlestoop i even got the thermal paste reapplied but the laptop still hasnt stopped overheating and hence thermal throttling The overheating...

Hello everyone I'm about to build my first computer, and I don't want to screw it up. I've put a link to the stuff I have in mind down below, and if someone would be so gently and just take a quick look on it and check if everything's cool and no problems that would be great. I've had help from...