I have 10700KF with Noctua NH-U12S.
I put my Graphics card under 100% load and then run Prime95 small ffts to see if the CPU can cope with the combined heat.
When I run Prime95 with all cores, it runs at 4.05 Ghz and 80 degrees.
But when I run it with only 4 cores it runs at 4.66 Ghz and 97-100 degrees
PL1 is set to 125W and PL2 is 190W (5 seconds)
I feel a bit unfomfortable that the CPU is allowed to run indefinitely at 100 degrees. Is there a way to enforce a thermal limit when the CPU reaches, say 90 degrees?
Thanks
I put my Graphics card under 100% load and then run Prime95 small ffts to see if the CPU can cope with the combined heat.
When I run Prime95 with all cores, it runs at 4.05 Ghz and 80 degrees.
But when I run it with only 4 cores it runs at 4.66 Ghz and 97-100 degrees
PL1 is set to 125W and PL2 is 190W (5 seconds)
I feel a bit unfomfortable that the CPU is allowed to run indefinitely at 100 degrees. Is there a way to enforce a thermal limit when the CPU reaches, say 90 degrees?
Thanks