2 short Beeps given, No display!

C0AD

Reputable
Mar 30, 2014
19
0
4,510
New build! 2 short beeps and no display to Monitor (connected with HDMI)
I have checked my RAM and Video card, seated properly.
I have looked everywhere, I have many solutions.
Any help here? Really appreciated!
 


Take out the ram sticks and then power on your board. What is the beep sequence you get?
UPDATE: Try to reset the cmos by taking out the battery from motherboard after unplugging psu, wait 5 mins and reinstall the battery and try again. Also, if you have another power supply, check the setup with that just to rule out the possibility of psu.
 


mostly probably it looks like ram issue, make sure you are sticking RAM in Ram slots like following:
memory15.jpg

Which is if you are using 2 ram sticks, insert in 1 and 2 slots i.e. both A or insert in 3 and 4 i.e both in B.
 

TRENDING THREADS