Hi, I bought DDR4 3200MHz RAM but in Bios there is only 2400Mhz, I had to manually change it to 2926MHz and when I want to add more (like 3000+) Pc won't start, is it normal ?
Hi, I bought DDR4 3200MHz RAM but in Bios there is only 2400Mhz, I had to manually change it to 2926MHz and when I want to add more (like 3000+) Pc won't start, is it normal ?
CPU: Ryzen 7 2700XYou need to post your cpu and motherboard model.
Yep it works, but nothing above thisDoes 2926(do you mean 2933?) work?
Can you post screen shot of spd tab in cpuz plz
I found something, but I'm not sure what to change..Those timings you see in the 2nd last spd xmp profile for 3200, try enter those timings manually. 16, 18, 18, 36, 74. Vram voltage 1.35v.
You have missing one line there.16
18
18
36
74
You have missing one line there.
DRAM CAS LAtency 16
DRAM RAS to CAS Read Delay 18
DRAM RAS to CAS Write Delay 18
DRAM RAS PRE Time 18
DRAM RAS ACT Time 36
TRC 74
DRAM voltage 1.35V
Not 5 lines. 6 lines plus voltage.
Double check for correct ram slots.
In your cpu-z shot it shows 1st slot.
That suggests your not in the optimum dual channel configuration which is 2nd and 4th slots working right from the cpu.
Ok i will try. thanksDouble check for correct ram slots.
In your cpu-z shot it shows 1st slot.
That suggests your not in the optimum dual channel configuration which is 2nd and 4th slots working right from the cpu.
Dude, you are a god, i put it in 2nd and 4th and now I change it to 3200MHz and Pc is running, Thanks to you! and Thanks to all others, you are all great!Double check for correct ram slots.
In your cpu-z shot it shows 1st slot.
That suggests your not in the optimum dual channel configuration which is 2nd and 4th slots working right from the cpu.