Question 4 pins came off power supply

[ad1340]

will it still work? pls help

my power supply is da

Thermaltake SMART 600W ATX 12V V2.3/EPS 12V 80 Plus Certified Active PFC Power Supply PS-SPD-0600NPCWUS-W​

 

[Ralston18]

Make and model motherboard?

Make and model PSU?

 

[ad1340]

https://www.amazon.com/dp/B09LGY38L4?ref=ppx_yo2ov_dt_b_fed_asin_title

https://www.amazon.com/dp/B07XH629TV?ref=ppx_yo2ov_dt_b_fed_asin_title

AAAAAAA

 

[DSzymborski]

It's a 20+4 connector; it's supposed to come off. Whether or not it's a good idea to use this PSU depends on what the PSU is and what you're powering.

 

[Zerk2012]

https://www.amazon.com/dp/B09LGY38L4?ref=ppx_yo2ov_dt_b_fed_asin_title

https://www.amazon.com/dp/B07XH629TV?ref=ppx_yo2ov_dt_b_fed_asin_title

AAAAAAA

I have no clue why your asking about the connector and linking a cooler.

The connector looks like a 20+4 pin for the motherboard, it should snap back together.

 

[ad1340]

oh shoot sorry i linked the wrong thing wait

 

[ad1340]

me fix

https://www.amazon.com/dp/B014W3EMAO?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

 

[ad1340]

I have no clue why your asking about the connector and linking a cooler.

The connector looks like a 20+4 pin for the motherboard, it should snap back together.

i was trying to put it in and then i took it back off and the 4 pins came out and im using this tutorial

View: https://www.youtube.com/watch?v=Mho0M1Ns0Rw

 

[DSzymborski]

me fix

https://www.amazon.com/dp/B014W3EMAO?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

Eww. That's a really cheaply made, group-regulated PSU. Hopefully you're powering a very light machine with it (office PC or a basic gaming PC that has a GPU that doesn't require supplementary power).

 

[ad1340]

Eww. That's a really cheaply made, group-regulated PSU. Hopefully you're powering a very light machine with it (office PC or a basic gaming PC that has a GPU that doesn't require supplementary power).

but is it more powerful than an hp compaq elite from 2012

 

[ad1340]

I have no clue why your asking about the connector and linking a cooler.

The connector looks like a 20+4 pin for the motherboard, it should snap back together.

what do u mean by snap back together like i just put both of them in the thing or i need to connect the 4 pins back to the rest of the pins cuz im trying but when i try to put both of them inside it feels like im about to break it

 

[ad1340]

im trying to push in the pins into place and then put the 4 pins inside the motjherboard after but it wont fully go in and my fingers hurt

 

[Ralston18]

Double check the plug orientation.

There are different shapes and if you do not look carefully you may be trying to fit the proverbial square peg into a round hole.

 

[ad1340]

huh? i dont get what u mean by proverbial square peg