64-bit PC BUILDING.

[Basiliko5]

Im thinking of making a powerfull pc but i dont know a lot of things about what parts should i use, if they fit together or if they will work together at max potential.. After looking around on the net about motherboards and stuff like that ifound those parts and i'd like to know what do you think of them and if you can suggest enything better :

Motherboard: Gigabyte Z97-D3H

Processors: Intel Core i7-4770K

RAM: G.SKILL F3-12800CL9D-8GBXL 8GB (2X4GB) DDR3 PC3-12800 1600MHZ RIPJAWSX DUAL CHANNEL KIT

Hard disk: Western Digital Scorpio Blue 500GB (WD5000LPVX)

graphics card: MSI GeForce GT730 2GB (V809-1413R)
I need it to be 64-bit with windows 7.
(That's all for now)

Do i have any chances??? (and sorry for my English).

 

[tsuneo6]

hmm depends ofc. the i3 has better single core performance but for autocad etc the fx8320 seems better though. I'm just speculating though

 

[RCFProd]

hmm depends ofc. the i3 has better single core performance but for autocad etc the fx8320 seems better though. I'm just speculating though

Oh absolutely. I'd prefer the FX8320 for rendering and Autocad. However, the i3 will boost significiantly in mulitasking performance with hyper threading.

 

[tsuneo6]

ah well, lets see what the Op makes of it! he might jsut get there with an i5!

 

[Basiliko5]

**CPU** | [Intel Core i5-4690K 3.5GHz Quad-Core Processor](http://pcpartpicker.com/part/intel-cpu-bx80646i54690k) | $219.88 @ OutletPC
**Motherboard** | [Gigabyte GA-Z97-HD3 ATX LGA1150 Motherboard](http://pcpartpicker.com/part/gigabyte-motherboard-gaz97hd3) | $97.99 @ Directron
**Memory** | [G.Skill Ripjaws X Series 8GB (2 x 4GB) DDR3-1866 Memory](http://pcpartpicker.com/part/gskill-memory-f314900cl9d8gbxl) | $64.99 @ Newegg
**Storage** | [Western Digital Caviar Blue 1TB 3.5" 7200RPM Internal Hard Drive](http://pcpartpicker.com/part/western-digital-internal-hard-drive-wd10ezex) | $52.24 @ Directron
**Video Card** | [MSI Radeon R9 280 3GB TWIN FROZR Video Card](http://pcpartpicker.com/part/msi-video-card-r9280gaming3g) | $179.99 @ Newegg
**Power Supply** | [Corsair CX 500W 80+ Bronze Certified Semi-Modular ATX Power Supply](http://pcpartpicker.com/part/corsair-power-supply-cx500m) | $59.88 @ OutletPC
**Optical Drive** | [Lite-On iHAS124-14 DVD/CD Writer](http://pcpartpicker.com/part/lite-on-optical-drive-ihas12414) | $17.98 @ OutletPC
| | **Total**
| Prices include shipping, taxes, and discounts when available | $692.95
| Generated by PCPartPicker 2015-01-22 09:12 EST-0500 |

What do you think?A friend of mine said he knew some things...Should i change something?
And also...for 1600 Mhz RAM the sites pops anotification saying:
emory operating voltage of 1.65V exceeds the Intel Haswell CPU recommended maximum of 1.5V+5% (1.575V). This memory module may run at a reduced clock rate to meet the 1.5V voltage recommendation, or may require running at a voltage greater than the Intel recommended maximum.Is this a problem????

 

[badboyrog2]

``What do you think?A friend of mine said he knew some things...Should i change something? ``

this is a good build so far ..but i do not like the board if in the futur you want to SLI ..you will not be able to do it
this board have a bad audio chipset and bad vrm setup for overclocking

 

[Basiliko5]

What board do you suggest for SLI and future overclocking? And do you know anything about the 1600MHz and 1866MHz?IS there going to be a problem using 1600MHz RAM?

 

[badboyrog2]

this board
ASRock Z97 Extreme3
or this one
MSI Z97S SLI Plus

they are 30$ more expensive but futur proof

 

[badboyrog2]

``And do you know anything about the 1600MHz and 1866MHz?IS there going to be a problem using 1600MHz RAM? ``

there is no problem at all...that mean you will not be able to overclock the ram thats it

 

[tsuneo6]

or gigabyte z97x-SLI

 

[Basiliko5]

HEY guys! I finally built it! I mostly used the parts that you suggested and i can say i love it...BUT, i have a small problem. The first day i noticed that the boot was somehow fast (less than 1 minute)...and then i installed the drivers for the GPU from the cd ( i bought a sapphire dual-x r9 280)downloaded catalyst control center, made some updates for windows( installed win7 ultimate 64 bit). Also, i installed a drawing programm i need for university projects. After that, the pc boots at about 2 and a half minutes..... 🙁

I know it is probably the wrong category to mention this problem, but i would appreciate some help.... I mean i havent even closed the pc case, what the heck?