Question 7800x3d, NZXT 360 Kraken Plus RGB, H6 Flow Case, B650 Tomahawk Wifi

[sammb7560]

Unsure if these parts fit together, please can someone advise as cannot find it anywhere. Need the H6 flow rather than H9 as I have limited room and no room increase. Currently have Dark rock Pro 4 with my 7800x3d and does not run cool enough so looking for an AIO - ideally with the temp gauge. Was looking at arctic liquid freezer pro 3 but everywhere says it does not fit the H6 (and if it does - varies per MB - it rests on MB but a bit too claustrophobic for me)

Thanks in advance

 

[Lutfij]

Are you asking if all the parts will drop into the case or are you asking about cooler compatibility inside the case?

You could do a sanity check by placing those parts into PCPartPicker to get some info about compatibility/clearances;
https://pcpartpicker.com/builds/by_part/8QMMnQ#c=360

Just make sure to look for a dual channel DDR5-6000MHz tight latencied ram kit with AMD's E.X.P.O advertised on it. The ram's frequency I mentioned prior is the sweet spot for AMD AM5 platform. If you get DDR5-6400MHz for the same price, would be worth buying into it.

Currently have Dark rock Pro 4 with my 7800x3d and does not run cool enough
For the sake of relevance, we'll need to know what your temps are at this moment of time, inclusive of your ambient room air temps. Same motherboard in the title of the thread? What BIOS version are you on for your motherboard? have you tied undervolting your processor?

You have NZXT's 360 Kraken Plus RGB mentioned in the thread title, yet you state looking into an Arctic Liquid Freezer III Pro while you currently have a Be Quiet! Dark Rock Pro 4.