8 Pin PCIE Female to 4 pin female molex adapter

[Danang Tls]

hi,

i want to ask if there is any adapter for 8 Pin PCIE Female to 4 pin female molex adapter, or 6 pin pcie male to 4 pin female molex adapter ?

i know there are many 4 pin molex to 6 / 8 pin pcie adapter for powering GPU Card, but i need the other way around.

if you guys confused why i need this cable, is that i have device that only have 6+2 pin pcie cable and 2 pin (for fan) from the PSU. i bought Anker USB 3 pcie that need power from 4 pin molex, and my PSU only have those cable (6+2 pin pcie and 2 pin fan).

Anker product:
http://www.amazon.com/gp/product/B005ARQV6U/ref=oh_details_o00_s00_i00

or is there any adapter from 2 pin (fan) to 4 pin molex adapter? can i power the card with this 2 pin port?

where can i find those adapter? kind regards,

 

[ko888]

im in the netherlands until next month .. ah,,, hoping that you can make it for me......

oh,, so for example the red and black cable is for the usb3 pci card, and yellow+black for the 8pin port on the board?

On the pre-assembled modules you do not go by the color of the wires on the module. There is a label affixed to the module that tells you what wires are the +12V input and what wires are for the +5V output.

You need to wire a 4-pin Molex peripheral power connector, like the ones found on an ATX power supply, to the +5V output wires of the module, paying attention to proper DC polarity to the correct pins. Look at the pin assignment for the Disk drive connector here:

http://en.wikipedia.org/wiki/Molex_connector

 

[Danang Tls]

i found this!!!

http://www.amazon.com/Coolerguys-100-240v-Molex-Power-Adapter/dp/B000MGG6SC/ref=pd_rhf_eetyp_s_cp_5_0RZZ?ie=UTF8&refRID=1AFGM771ZAV6V41894KY

it is possible to use that right???

 

[Danang Tls]

can anyone help me to identify what connector is this? is it deliver 5v+12v?

http://prntscr.com/5ltfpk

thank you..

 

[Someone Somewhere]

I don't know what connector that is; can you take a picture from above? Often they have silkscreened labels.

The power supply above should work, but I'm not certain how much the card would like having power plugged in without any data.