Hi, everyone. I'm pretty new to this, but I think I've done everything correctly thus far. These are my current specs.
Asus ROG Strix Z390-E
i7 8700k OC to 5.0ghz no delid
64gb Corsair Vengeance RGB Pro 3000mhz 15-17-17-35
EVGA FTW 3 Hybrid 1080ti.
NZXT Kraken x62 with 2 EK-Furious Vardar Evo 140mm fans in Pull configuration
Seasonic 750w Fully Modular 80+ Gold PSU
When I first got this processor, I immediately established a baseline at the out of the box settings at 1.3v.
I found baseline stability as low as 4.7ghz at 1.230v.
Seems like I got lucky with the purchase. I've managed to OC to 5.0ghz at 1.290v with AVX offset of 0 and LLC of 6. I successfully passed 8 hours (7hrs and 52 min) of Prime 95 26.6 small FFTs, Intel Burn Test, 10 passes at max. Asus Real Bench, and 5 hours of Aida 64( i know it's a bad stess testor) Memtest also passed overnight no issues.
However, If I run newer versions of Prime 95 with AVX disabled in the config, The workers will start failing after just a few hours in addition to the temps almost reaching 100c
Should I consider this OC stable? or should I be able to pass newer versions of P95) despite the horrendous temperature?
https://imgur.com/a/UUyZs8a
Asus ROG Strix Z390-E
i7 8700k OC to 5.0ghz no delid
64gb Corsair Vengeance RGB Pro 3000mhz 15-17-17-35
EVGA FTW 3 Hybrid 1080ti.
NZXT Kraken x62 with 2 EK-Furious Vardar Evo 140mm fans in Pull configuration
Seasonic 750w Fully Modular 80+ Gold PSU
When I first got this processor, I immediately established a baseline at the out of the box settings at 1.3v.
I found baseline stability as low as 4.7ghz at 1.230v.
Seems like I got lucky with the purchase. I've managed to OC to 5.0ghz at 1.290v with AVX offset of 0 and LLC of 6. I successfully passed 8 hours (7hrs and 52 min) of Prime 95 26.6 small FFTs, Intel Burn Test, 10 passes at max. Asus Real Bench, and 5 hours of Aida 64( i know it's a bad stess testor) Memtest also passed overnight no issues.
However, If I run newer versions of Prime 95 with AVX disabled in the config, The workers will start failing after just a few hours in addition to the temps almost reaching 100c
Should I consider this OC stable? or should I be able to pass newer versions of P95) despite the horrendous temperature?
https://imgur.com/a/UUyZs8a