[SOLVED] A lot of black spots flickering in all 3D games, on only some 3d textures

[EimaX_]

Hello, so in all 3D games like cs go or pubg a lot of black spots keep flickering and appearing in same spots. I had done a little overclock, but I dont think its that becouse stress test dont crash my pc or have black spots, it hadnt reached above 70 celsius. I have a gtx 460 gpu. I have tried uninstalling gpu driver with ddu, and reinstalling, installing older drivers, i had tested ram, reinserted gpu, tried another monitor cable. In videos you can see the problem. Please help.

View: https://www.youtube.com/watch?v=hsrvzMU29xI

View: https://www.youtube.com/watch?v=tbkl_bTGXYA

View: https://www.youtube.com/watch?v=-dIGZm1L6Oo

 

[uppercut4u]

Remove and reseat the GPU. Make sure power cables are good and tight and the I/O cables to monitor are good and tight. Try a different PCIE slot and or try the card in another PC

 

[RipNDoot]

Hi there i have somthing similar? i would say so anyhow, i kept getting glitches like this or most recenltly in DOOM eternal i was getting weird colour glitches almost like it was flickering though the RGB spectrum. i decided my 1070 was due new thermal paste and pads so i ripped it out and found some condensation (i think?) on the card, cleaned all that away and my issue has gone away.

I'm not saying your card has any condensation but if you have the ability to open your card and clean it out it wouldnt hurt that much,

(should add i dont use a waterblock on my card its still the stock air cooler that came with it)

 

[EimaX_]

Hi there i have somthing similar? i would say so anyhow, i kept getting glitches like this or most recenltly in DOOM eternal i was getting weird colour glitches almost like it was flickering though the RGB spectrum. i decided my 1070 was due new thermal paste and pads so i ripped it out and found some condensation (i think?) on the card, cleaned all that away and my issue has gone away.

I'm not saying your card has any condensation but if you have the ability to open your card and clean it out it wouldnt hurt that much,

(should add i dont use a waterblock on my card its still the stock air cooler that came with it)

Where exactly you found condensation on?

 

[RipNDoot]

Where exactly you found condensation on?

If i can upload a photo or even link a photo i will try and show you,

https://imgur.com/a/WHca8zs

View: https://imgur.com/gallery/WHca8zs

https://imgur.com/qtq44sb

View: https://imgur.com/qtq44sb


It looks like it was forming around the heat pipes. im not sure if it was cooling the moisture in the air or what, but there was a liquid substance on the pcb for sure. had no issues seince i cleaned it though.