A7N8X-E Dx Home Network

Toggle sidebar Toggle sidebar
B

bill

Distinguished
Mar 30, 2004
1,834
0
19,780
Archived from groups: alt.comp.periphs.mainboard.asus (More info?)

I am trying (without sucess so far) to install a small network between
my home and my shop.
First I tried to hook the two computers directly together ( I have two
ethernet ports on my computer) without any success. I always got the
error message that a network cable is unplugged. everything seemed to
be connected ok.

Secondly I bought a Linksys BEFSR41 Router, and hooked my cable modem
into it, and then hooked up my XP machine, which works as it should.
However, when I plug the cable for the second computer, nothing
happens! I am wondering if I have it wired correctly?? Can anyone tell
me where I can get a wiring diagram for the two plugs??

Sorry if this a little off topic!

Thanks ,
Wildbill


A7N8X-E Deluxe Revision 2.xx BIOS 1008
AMD Athalon XP 2800+ Barton Core
2 X- Xerox (512 MB PC3200 DDR SDRAM)
Geforce FX 5200 128MB
Windows XP Home SP1
3Dvision TV/FM/Video Capture
Maxtor DiamondMax Plus 8 40GB Hard Drive
Western Digital Caviar WD1600BB 160GB Hard Drive
........and the list goes on.........
 
Archived from groups: alt.comp.periphs.mainboard.asus (More info?)

http://www.practicallynetworked.com/sharing/

<Bill> wrote in message news:stmnb0p1lmp4nhv4m9sa5cc635mjq2umkq@4ax.com...
> I am trying (without sucess so far) to install a small network between
> my home and my shop.
> First I tried to hook the two computers directly together ( I have two
> ethernet ports on my computer) without any success. I always got the
> error message that a network cable is unplugged. everything seemed to
> be connected ok.
>
> Secondly I bought a Linksys BEFSR41 Router, and hooked my cable modem
> into it, and then hooked up my XP machine, which works as it should.
> However, when I plug the cable for the second computer, nothing
> happens! I am wondering if I have it wired correctly?? Can anyone tell
> me where I can get a wiring diagram for the two plugs??
>
> Sorry if this a little off topic!
>
> Thanks ,
> Wildbill
http://www.practicallynetworked.com/sharing/
 
Archived from groups: alt.comp.periphs.mainboard.asus (More info?)

Bill wrote:

> I am trying (without sucess so far) to install a small network between
> my home and my shop.
> First I tried to hook the two computers directly together ( I have two
> ethernet ports on my computer) without any success. I always got the
> error message that a network cable is unplugged. everything seemed to
> be connected ok.
>
> Secondly I bought a Linksys BEFSR41 Router, and hooked my cable modem
> into it, and then hooked up my XP machine, which works as it should.
> However, when I plug the cable for the second computer, nothing
> happens! I am wondering if I have it wired correctly?? ...

Are you sure you connected the ethernet cards via a _crossed_ network
cable?

Roy
 
Archived from groups: alt.comp.periphs.mainboard.asus (More info?)

Hi,
Probably nothing to do with mobo. Probably just a question of configuring
the network. Suggest you ask the same question at
microsoft.public.en.windowsxp.connection.
Anyway, the reason why the point to pint (without router) solution didn't
work is most probably because you did not use a crossed cable (which you
shoud not use with your router).
By the way, when you plug your cables in the router, do the connection leds
indicate a connection. If so, it is surely a software prob (see above)
Good luck
Serge
<Bill> a écrit dans le message de
news:stmnb0p1lmp4nhv4m9sa5cc635mjq2umkq@4ax.com...
> I am trying (without sucess so far) to install a small network between
> my home and my shop.
> First I tried to hook the two computers directly together ( I have two
> ethernet ports on my computer) without any success. I always got the
> error message that a network cable is unplugged. everything seemed to
> be connected ok.
>
> Secondly I bought a Linksys BEFSR41 Router, and hooked my cable modem
> into it, and then hooked up my XP machine, which works as it should.
> However, when I plug the cable for the second computer, nothing
> happens! I am wondering if I have it wired correctly?? Can anyone tell
> me where I can get a wiring diagram for the two plugs??
>
> Sorry if this a little off topic!
>
> Thanks ,
> Wildbill
>
>
> A7N8X-E Deluxe Revision 2.xx BIOS 1008
> AMD Athalon XP 2800+ Barton Core
> 2 X- Xerox (512 MB PC3200 DDR SDRAM)
> Geforce FX 5200 128MB
> Windows XP Home SP1
> 3Dvision TV/FM/Video Capture
> Maxtor DiamondMax Plus 8 40GB Hard Drive
> Western Digital Caviar WD1600BB 160GB Hard Drive
> .......and the list goes on.........
 
Archived from groups: alt.comp.periphs.mainboard.asus (More info?)

Assuming you have used the correct cables, when you plug in nothing will
happen untill you configure / setup the network

"SVDV" <SVDV@hotmail.nospam.com> wrote in message
news:40bc31a3$0$28027$a0ced6e1@news.skynet.be...
> Hi,
> Probably nothing to do with mobo. Probably just a question of configuring
> the network. Suggest you ask the same question at
> microsoft.public.en.windowsxp.connection.
> Anyway, the reason why the point to pint (without router) solution didn't
> work is most probably because you did not use a crossed cable (which you
> shoud not use with your router).
> By the way, when you plug your cables in the router, do the connection
leds
> indicate a connection. If so, it is surely a software prob (see above)
> Good luck
> Serge
> <Bill> a écrit dans le message de
> news:stmnb0p1lmp4nhv4m9sa5cc635mjq2umkq@4ax.com...
> > I am trying (without sucess so far) to install a small network between
> > my home and my shop.
> > First I tried to hook the two computers directly together ( I have two
> > ethernet ports on my computer) without any success. I always got the
> > error message that a network cable is unplugged. everything seemed to
> > be connected ok.
> >
> > Secondly I bought a Linksys BEFSR41 Router, and hooked my cable modem
> > into it, and then hooked up my XP machine, which works as it should.
> > However, when I plug the cable for the second computer, nothing
> > happens! I am wondering if I have it wired correctly?? Can anyone tell
> > me where I can get a wiring diagram for the two plugs??
> >
> > Sorry if this a little off topic!
> >
> > Thanks ,
> > Wildbill
> >
> >
> > A7N8X-E Deluxe Revision 2.xx BIOS 1008
> > AMD Athalon XP 2800+ Barton Core
> > 2 X- Xerox (512 MB PC3200 DDR SDRAM)
> > Geforce FX 5200 128MB
> > Windows XP Home SP1
> > 3Dvision TV/FM/Video Capture
> > Maxtor DiamondMax Plus 8 40GB Hard Drive
> > Western Digital Caviar WD1600BB 160GB Hard Drive
> > .......and the list goes on.........
>
>
 
Archived from groups: alt.comp.periphs.mainboard.asus (More info?)

The 2 ethernet ports are different. One is 10-100 and the other 10-100-1000.
Make sure the port you are connected to has the driver loaded. check in
device manager under Network Adapters. There should be an entry for Marvell
Yukon Gigabit Ethernet (the Gigabit adapter) and an entry for NVIDIA nForce
MCP Networking Controller (the 10-100 adapter). If not, use the driver disc
that came with the motherboard and install the driver.
David

<Bill> wrote in message news:stmnb0p1lmp4nhv4m9sa5cc635mjq2umkq@4ax.com...
> I am trying (without sucess so far) to install a small network between
> my home and my shop.
> First I tried to hook the two computers directly together ( I have two
> ethernet ports on my computer) without any success. I always got the
> error message that a network cable is unplugged. everything seemed to
> be connected ok.
>
> Secondly I bought a Linksys BEFSR41 Router, and hooked my cable modem
> into it, and then hooked up my XP machine, which works as it should.
> However, when I plug the cable for the second computer, nothing
> happens! I am wondering if I have it wired correctly?? Can anyone tell
> me where I can get a wiring diagram for the two plugs??
>
> Sorry if this a little off topic!
>
> Thanks ,
> Wildbill
>
>
> A7N8X-E Deluxe Revision 2.xx BIOS 1008
> AMD Athalon XP 2800+ Barton Core
> 2 X- Xerox (512 MB PC3200 DDR SDRAM)
> Geforce FX 5200 128MB
> Windows XP Home SP1
> 3Dvision TV/FM/Video Capture
> Maxtor DiamondMax Plus 8 40GB Hard Drive
> Western Digital Caviar WD1600BB 160GB Hard Drive
> .......and the list goes on.........
 
Archived from groups: alt.comp.periphs.mainboard.asus (More info?)

http://www.homenethelp.com/web/howto/net.asp
try this site.....I followed their instructions and all worked
peter
<Bill> wrote in message news:stmnb0p1lmp4nhv4m9sa5cc635mjq2umkq@4ax.com...
> I am trying (without sucess so far) to install a small network between
> my home and my shop.
> First I tried to hook the two computers directly together ( I have two
> ethernet ports on my computer) without any success. I always got the
> error message that a network cable is unplugged. everything seemed to
> be connected ok.
>
> Secondly I bought a Linksys BEFSR41 Router, and hooked my cable modem
> into it, and then hooked up my XP machine, which works as it should.
> However, when I plug the cable for the second computer, nothing
> happens! I am wondering if I have it wired correctly?? Can anyone tell
> me where I can get a wiring diagram for the two plugs??
>
> Sorry if this a little off topic!
>
> Thanks ,
> Wildbill
>
>
> A7N8X-E Deluxe Revision 2.xx BIOS 1008
> AMD Athalon XP 2800+ Barton Core
> 2 X- Xerox (512 MB PC3200 DDR SDRAM)
> Geforce FX 5200 128MB
> Windows XP Home SP1
> 3Dvision TV/FM/Video Capture
> Maxtor DiamondMax Plus 8 40GB Hard Drive
> Western Digital Caviar WD1600BB 160GB Hard Drive
> .......and the list goes on.........
 
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom