A7V dividers for AGP, PCI ???

[Junkcollector]

I have an A7V with Duron 600@900 using dipswitches. When I ran SANDRA200 to get info on my system, it states my AGP bus speed is 100mhz then add in the 4X AGP, it becomes 400mhz. The PCI bus is set to 1/2 running at 50mhz. Everything is stable which is great, but I'm trying to change the dividers, actually I just want to know how to do it. any help would be greatly appreciated

 

[LTJLover]

That seems really weird...I seriously doubt the PCI bus would be at 50MHz. PCI bus is usually 33MHz. What FSB you running? I think that software is doing something funny.

Jon
"Water-Cooled CPU Runner"

 

[Bubba]

Make sure you are using Sandra 2001. It has a lot of fixes for newer hardware.

 

[Guest]

SSS2000 always reported incorrect deviders. 2001 fixed it.
AFAIK the only way to change the devider settings would be with a customised bios flash and then only if other settings are possible. 1/3 is supposed to come on at 125fsb (according to the manual) though with the fsb crippled I don't know if this is a lie as well.