Access network from behind router into "front"

[monardo]

Hello

My work uses network with static IPs in the range of 192.168.200.1-192.168.200.254. I was allocated one IP for my PC (192.168.200.200).

What I did was, that I took a router, configured WAN side with 192.168.200.200 and with LAN side I get IP range 192.168.0.2-192.168.0.254.

This way I am able to connect several machines to internet.

The question is:
is there a way to access computer on main sub-net (SQL server on 192.168.200.181) from PC on my "own" sub-net (e.g. from 192.168.0.2)

 

[barto]

Can you ping it from your computer with your current IP settings?

 

[monardo]

make your subnet mask 255.255.0.0 instead of 255.255.255.0

I changed subnet mask (of LAN side) as recommended, but I get "LAN subnet in conflict with WAN subnet"

 

[monardo]

Can you ping it from your computer with your current IP settings?

Thanks for reply.
I simulated setup at home and strangely enough it does ping, while I clearly remember it did not ping at work. I will check on Monday (at the office) to see what is different between my home "simulation" and actual work setup.

 

[barto]

So just because the server isn't on the same subnet doesn't mean you won't be able to reach it. If the correct route is configured on the router, you'll be able to reach it.