System:
CPU - FX 6300 OC'd 4.4GHz
Motherboard - Asus M5A99X Evo R2.0
GPU - GTX 770
First stick of RAM was - G SKill Ripjaws X 4GB
http://www.newegg.com/Product/Product.aspx?Item=N82E16820231718
After some time I needed another stick and newegg was out of stock at the time so I picked up a Corsair Vengeance Blue 4GB stick.
http://www.newegg.com/Product/Product.aspx?Item=N82E16820145346&cm_re=corsair_vengeance_blue-_-20-145-346-_-Product
Both sticks have the same specs:
DDR3 1600
9-9-9-24 Timings
CAS 9
1.5V
When I added the second stick everything booted up fine and it works. In cpu-z under memory the frequency is correct but the timings are not. Then under the SPD tab the G.skill stick has the proper speed and timings (800 MHz). The Corsair on the other hand is at 667 MHz. Including screenshots below.
http://imgur.com/x6eSleG
Any idea what the problem is? Is cpu-z wrong or is there some setting I didn't change.
Thanks
CPU - FX 6300 OC'd 4.4GHz
Motherboard - Asus M5A99X Evo R2.0
GPU - GTX 770
First stick of RAM was - G SKill Ripjaws X 4GB
http://www.newegg.com/Product/Product.aspx?Item=N82E16820231718
After some time I needed another stick and newegg was out of stock at the time so I picked up a Corsair Vengeance Blue 4GB stick.
http://www.newegg.com/Product/Product.aspx?Item=N82E16820145346&cm_re=corsair_vengeance_blue-_-20-145-346-_-Product
Both sticks have the same specs:
DDR3 1600
9-9-9-24 Timings
CAS 9
1.5V
When I added the second stick everything booted up fine and it works. In cpu-z under memory the frequency is correct but the timings are not. Then under the SPD tab the G.skill stick has the proper speed and timings (800 MHz). The Corsair on the other hand is at 667 MHz. Including screenshots below.
http://imgur.com/x6eSleG
Any idea what the problem is? Is cpu-z wrong or is there some setting I didn't change.
Thanks