Build Advice Advice on new rig

[NateCo1]

So recently Ive been looking to buy a new gaming pc, I will use it for mid-high end gaming on 1440p 144hz resolution. I would like to know if this build is good or if there are things I can change that will be better.
The rig is:
CPU: Intel Core i5-13600K 3.5 GHz 14-Core Processor

CPU Cooler: Antec Symphony ARGB 72 CFM Liquid CPU Cooler

Motherboard: Gigabyte B760 AORUS ELITE AX ATX LGA1700 Motherboard

Memory: Corsair Vengeance 32 GB (2 x 16 GB) DDR5-6000 CL30 Memory

Storage: Netac NV7000 2 TB M.2-2280 PCIe 4.0 X4 NVME Solid State Drive

Video Card: Gigabyte WINDFORCE OC GeForce RTX 4070 12 GB Video Card

Case: Antec AX90 ATX Mid Tower Case

Power Supply: Antec NeoECO Gold 850 W 80+ Gold Certified Fully Modular ATX Power Supply

 

[Why_Me]

It all works together ^^ With that said what country are you located and what is your budget?

 

[ohio_buckeye]

That build should be decent. I’ve got a 12600kf and an rx 6800xt gpu that I got on sale which pretty much is even with the 4070. Im pretty happy with my setup. So with you having a little better cpu, I think you’ll be happy with it

 

[NateCo1]

It all works together ^^ With that said what country are you located and what is your budget?

I dont really feel comfortable saying where Im from but knowing that it all works together is enough for me,thanks^^.

 

[geofelt]

Parts are reasonable.
Some thoughts:

1. Consider a better known brand for the ssd.
Intel or Samsung.

2. aio coolers do not last forever. Plan on replacing in 5 years.
A good twin tower air cooler will cool equally well.
And 13600K does not really need top cooling:

View: https://www.youtube.com/watch?v=dNFgswzTvyc

 

[SubaruWRX244]

Build looks very good. My friend has a similar build with the 4070 ti and a 1440p monitor. If you can push for the TI model, that's your best bet.

 

[ohio_buckeye]

I can say if you consider air, grab the Thermalright peerless assassin 120 se. In the USA it runs about 35 dollars but has performance comparable to some aios. Plus it’s pretty easy to install. And if a fan goes out oh well toss in a new 120mm fan.

 

[NateCo1]

Parts are reasonable.
Some thoughts:

1. Consider a better known brand for the ssd.
Intel or Samsung.

2. aio coolers do not last forever. Plan on replacing in 5 years.
A good twin tower air cooler will cool equally well.
And 13600K does not really need top cooling:

View: https://www.youtube.com/watch?v=dNFgswzTvyc

Would you say the noctua NH-D15 is a good twin tower air cooler for the i5 13600k?

 

[ohio_buckeye]

Would you say the noctua NH-D15 is a good twin tower air cooler for the i5 13600k?

Personally I can’t say I’ve used the noctua cooler.

Here’s the cooler I’ve got on my 12600kf.

https://www.amazon.com/Thermalright-Peerless-Assassin-120-Cooler/dp/B09P4KH7QK?th=1&psc=1

For the money it’s not bad. It keeps my 12600kf around 60 degrees in cinebench and just over that with Intel burn test.

 

[geofelt]

Personally I can’t say I’ve used the noctua cooler.

Here’s the cooler I’ve got on my 12600kf.

https://www.amazon.com/Thermalright-Peerless-Assassin-120-Cooler/dp/B09P4KH7QK?th=1&psc=1

For the money it’s not bad. It keeps my 12600kf around 60 degrees in cinebench and just over that with Intel burn test.

There is none better.
But, check for ram clearance.
The rgb version is 56mm tall so the front fan would need to be moved up.
The low profice version would be ok.

NH-D15

Built on the basis of the legendary NH-D14 and carrying on its quest for ultimate quiet cooling performance, Noctua’s flagship model NH-D15 is an elite-class dual tower cooler for the highest demands. Its expanded heatpipe layout and two premium grade NF-A15 140mm fans with PWM support for...

noctua.at

The NH-D15s Performs similarly and is designed for tall ram:

NH-D15S

Tailored to provide superior RAM and PCIe compatibility, the NH-D15S is an asymmetrical single fan version of Noctua’s award-winning flagship model, the NH-D15. Thanks to its asymmetrical design, the NH-D15S clears the top PCIe slot on most µATX and ATX motherboards. At the same time, the single...

noctua.at

 

[NateCo1]

There is none better.
But, check for ram clearance.
The rgb version is 56mm tall so the front fan would need to be moved up.
The low profice version would be ok.

NH-D15

Built on the basis of the legendary NH-D14 and carrying on its quest for ultimate quiet cooling performance, Noctua’s flagship model NH-D15 is an elite-class dual tower cooler for the highest demands. Its expanded heatpipe layout and two premium grade NF-A15 140mm fans with PWM support for...

noctua.at

The NH-D15s Performs similarly and is designed for tall ram:

NH-D15S

Tailored to provide superior RAM and PCIe compatibility, the NH-D15S is an asymmetrical single fan version of Noctua’s award-winning flagship model, the NH-D15. Thanks to its asymmetrical design, the NH-D15S clears the top PCIe slot on most µATX and ATX motherboards. At the same time, the single...

noctua.at

I see, the dh-15s is available in my country unlike the thermalright one so Ill probably get it, thanks a lot!