again about 7n400 pro2 and sata

[Guest]

Archived from groups: alt.comp.periphs.mainboard.gigabyte (More info?)

hi all
i'm sorry for "bad" english but i'm italian )

i some problem during install a sata HD on 7n400 pro2 in base mode
first of all i've configured bios with this settings:

Adv. bios features -->sata\raid\scsi boot order: "sata"
Adv. bios feat. -->first boot device: "scsi"
Adv. bios feat. -->second boot dev.: "floppy"
Adv. bios feat. -->third boot dev.: "cdrom"
Integr. perif. --> onboard h\w serial ata: "enable"
Integr. perif. --> serial ata function: "base"

then i begun ti install WinXP, F6, plugged in the floppy with Si3112 (not
si3112r) driver and then, when installation was complete, rebooted.

after reboot, the system seems not found the sata hd !! ;__;

i try to install the driver on the previous OS on uATA HD, and all seems
ok: i can see the winxp installation file on sata hd, but it can't boot by
itself

help please
and happy Easter


p.s.: i tried with both new and old driver and bios version....

 

[Guest]

Archived from groups: alt.comp.periphs.mainboard.gigabyte (More info?)

"Fa" <v@incu.lo> wrote in message
news:y_9ec.57687$rM4.2305314@news4.tin.it...
> hi all
> i'm sorry for "bad" english but i'm italian )
>
> i some problem during install a sata HD on 7n400 pro2 in base mode
> first of all i've configured bios with this settings:
>
> Adv. bios features -->sata\raid\scsi boot order: "sata"
> Adv. bios feat. -->first boot device: "scsi"
> Adv. bios feat. -->second boot dev.: "floppy"
> Adv. bios feat. -->third boot dev.: "cdrom"
> Integr. perif. --> onboard h\w serial ata: "enable"
> Integr. perif. --> serial ata function: "base"
>
> then i begun ti install WinXP, F6, plugged in the floppy with Si3112
(not
> si3112r) driver and then, when installation was complete, rebooted.
>
> after reboot, the system seems not found the sata hd !! ;__;
>
> i try to install the driver on the previous OS on uATA HD, and all seems
> ok: i can see the winxp installation file on sata hd, but it can't boot by
> itself
>
> help please
> and happy Easter
>
>
> p.s.: i tried with both new and old driver and bios version....
>

Do you have any other PCI IDE controller cards fitted to the motherboard?

 

[Guest]

Archived from groups: alt.comp.periphs.mainboard.gigabyte (More info?)

Fred at home wrote:
> "Fa" <v@incu.lo> wrote in message
> news:y_9ec.57687$rM4.2305314@news4.tin.it...
>> hi all
>> i'm sorry for "bad" english but i'm italian )
>>
>> i some problem during install a sata HD on 7n400 pro2 in base mode
>> first of all i've configured bios with this settings:
>>
>> Adv. bios features -->sata\raid\scsi boot order: "sata"
>> Adv. bios feat. -->first boot device: "scsi"
>> Adv. bios feat. -->second boot dev.: "floppy"
>> Adv. bios feat. -->third boot dev.: "cdrom"
>> Integr. perif. --> onboard h\w serial ata: "enable"
>> Integr. perif. --> serial ata function: "base"
>>
>> then i begun ti install WinXP, F6, plugged in the floppy with
>> Si3112 (not si3112r) driver and then, when installation was
>> complete, rebooted.
>>
>> after reboot, the system seems not found the sata hd !! ;__;
>>
>> i try to install the driver on the previous OS on uATA HD, and all
>> seems ok: i can see the winxp installation file on sata hd, but it
>> can't boot by itself
>>
>> help please
>> and happy Easter
>>
>>
>> p.s.: i tried with both new and old driver and bios version....
>>
>
> Do you have any other PCI IDE controller cards fitted to the
> motherboard?

no, my complete hardware is:
-amd 2400+ (running @2340mhz 203*11.5x 10% overvolt with coolermaster
x-dream at 40°C)
-7n400 pro2
-2x512 MB ram corsair XMS pc3200 (2-3-3-6)
-ATI AIW 9700 pro
-1 addictional LAN card
-1 HD maxtor 80GB serial ATA
-2 HD maxtor 60GB ultra ATA

🙁

 

[Guest]

Archived from groups: alt.comp.periphs.mainboard.gigabyte (More info?)

"Fa" <v@incu.lo> wrote in message
news:Bpvec.60801$rM4.2481613@news4.tin.it...
> Fred at home wrote:
> > "Fa" <v@incu.lo> wrote in message
> > news:y_9ec.57687$rM4.2305314@news4.tin.it...
> >> hi all
> >> i'm sorry for "bad" english but i'm italian )
> >>
> >> i some problem during install a sata HD on 7n400 pro2 in base mode
> >> first of all i've configured bios with this settings:
> >>
> >> Adv. bios features -->sata\raid\scsi boot order: "sata"
> >> Adv. bios feat. -->first boot device: "scsi"
> >> Adv. bios feat. -->second boot dev.: "floppy"
> >> Adv. bios feat. -->third boot dev.: "cdrom"
> >> Integr. perif. --> onboard h\w serial ata: "enable"
> >> Integr. perif. --> serial ata function: "base"
> >>
> >> then i begun ti install WinXP, F6, plugged in the floppy with
> >> Si3112 (not si3112r) driver and then, when installation was
> >> complete, rebooted.
> >>
> >> after reboot, the system seems not found the sata hd !! ;__;
> >>
> >> i try to install the driver on the previous OS on uATA HD, and all
> >> seems ok: i can see the winxp installation file on sata hd, but it
> >> can't boot by itself
> >>
> >> help please
> >> and happy Easter
> >>
> >>
> >> p.s.: i tried with both new and old driver and bios version....
> >>
> >
> > Do you have any other PCI IDE controller cards fitted to the
> > motherboard?
>
> no, my complete hardware is:
> -amd 2400+ (running @2340mhz 203*11.5x 10% overvolt with coolermaster
> x-dream at 40°C)
> -7n400 pro2
> -2x512 MB ram corsair XMS pc3200 (2-3-3-6)
> -ATI AIW 9700 pro
> -1 addictional LAN card
> -1 HD maxtor 80GB serial ATA
> -2 HD maxtor 60GB ultra ATA
>
> 🙁
>

Did you ever fix it?

 

[Guest]

Archived from groups: alt.comp.periphs.mainboard.gigabyte (More info?)

"Fa" <v@incu.lo> wrote in message news:<y_9ec.57687$rM4.2305314@news4.tin.it>...
> hi all
> i'm sorry for "bad" english but i'm italian )
>
> i some problem during install a sata HD on 7n400 pro2 in base mode
> first of all i've configured bios with this settings:
>
> Adv. bios features -->sata\raid\scsi boot order: "sata"
> Adv. bios feat. -->first boot device: "scsi"
> Adv. bios feat. -->second boot dev.: "floppy"
> Adv. bios feat. -->third boot dev.: "cdrom"
> Integr. perif. --> onboard h\w serial ata: "enable"
> Integr. perif. --> serial ata function: "base"
>
> then i begun ti install WinXP, F6, plugged in the floppy with Si3112 (not
> si3112r) driver and then, when installation was complete, rebooted.
>
> after reboot, the system seems not found the sata hd !! ;__;
>
> i try to install the driver on the previous OS on uATA HD, and all seems
> ok: i can see the winxp installation file on sata hd, but it can't boot by
> itself
>
> help please
> and happy Easter
>
>
> p.s.: i tried with both new and old driver and bios version....

I had a somewhat similar problem... Try first boot device floppy,
second boot device cdrom, third boot device scsi.
if that doesnt work, put sata function to raid and reinstall again,
using the sata raid drivers.