Question AMD 7950 stuck in "Tahiti (Slave)" mode

[cuperus]

Hello everybody,

This is a very weird little problem. I got a AMD 7950 Sapphire 3GB Edition card. This problem tho is that it is not giving any output to the ports (HDMI, DVI, DP). The card has been used with another same card but not in crossfire. So i had a screen connected to it and it worked fine. Recently I wanted to move the card to a different pc and saw that It did not output anything. When i moved it back to my main pc i got the error B6 (or b2 idk anymore) wich means Legacy Bios initalization failed. So I used the intel hd graphics to go into Atiflash on my second pc. It did recognize the card but this is what i saw when i run the following commands:
atiflash -ai
atiflash -i
I tried upgrading the bios serval times but no luckl at all.

It's a really weird story and can't seem to fix this problem. If anyone could help me that would be amazing!

 

[RememberThe5th]

Have you tried when it did not give any output when the card is plugged to the monitor, after you powered the system to press reset button once and wait minute or two?
That was usually my issues with my previous motherboard with 1050ti and Rx 480.

 

[cuperus]

Have you tried when it did not give any output when the card is plugged to the monitor, after you powered the system to press reset button once and wait minute or two?
That was usually my issues with my previous motherboard with 1050ti and Rx 480.

Yes I did, but I don't think it's that easy to fix.