Yesterday I had to replace the CMOS battery in my motherboard (MSI MGP X570 gaming pro carbon) with a new one. Yes I have replaced the old CR2032 3V battery with a new identical one and I have put it in correctly.
Now when I boot my pc everything starts up, but I get no signal to my monitor. My Motherboard lights up in the VGA led, indicating it cannot find my GPU (Asus geforce gtx 1070 8gb dual oc). I can't use the display port on the motherboard either. I get no signal at all, I have tried different cables to make sure it isn't suddenly a faulty cable, but with the same result. No signal.
My GPU light in it's led1 indicating it's ready to run.
I can't access BIOS or log onto windows.
And yes I do unplug the power supply cord when I mess around with my pc internally, placing parts etc.
Any suggestions on how to solve this?
I just need to get a signal so I can see on my monitor what's going on. Then i can solve it from there seeing as the BIOS is likely reset.
I have tried having the pc unplugged with no power for 5 minutes, with no CMOS battery in it. During those 5 minutes I had the power button pressed down for 30. I read it should completely reset everything, however I'm still stuck at the same spot. No display.
Thanks in advance
Now when I boot my pc everything starts up, but I get no signal to my monitor. My Motherboard lights up in the VGA led, indicating it cannot find my GPU (Asus geforce gtx 1070 8gb dual oc). I can't use the display port on the motherboard either. I get no signal at all, I have tried different cables to make sure it isn't suddenly a faulty cable, but with the same result. No signal.
My GPU light in it's led1 indicating it's ready to run.
I can't access BIOS or log onto windows.
And yes I do unplug the power supply cord when I mess around with my pc internally, placing parts etc.
Any suggestions on how to solve this?
I just need to get a signal so I can see on my monitor what's going on. Then i can solve it from there seeing as the BIOS is likely reset.
I have tried having the pc unplugged with no power for 5 minutes, with no CMOS battery in it. During those 5 minutes I had the power button pressed down for 30. I read it should completely reset everything, however I'm still stuck at the same spot. No display.
Thanks in advance