[SOLVED] Aorus elite x570 doesn't work with 64gb ram?

[aysegulll]

My aorus elite x570 motherboard was working with 16gbx2 GSkill Trident Z Neo F4-3600C16D-32GTZNC ram. I wanted to add two more since DaVinci Resolve Fusion needed more for my application.
When I install them, the computer didn't open up at all, just runs and I had to shut down. I have read that reducing ram frequency helps but I don't know how to do that since even bios screen doesn't open up.

I will appreciate any suggestion.

 

[white.a.drew]

My aorus elite x570 motherboard was working with 16gbx2 GSkill Trident Z Neo F4-3600C16D-32GTZNC ram. I wanted to add two more since DaVinci Resolve Fusion needed more for my application.
When I install them, the computer didn't open up at all, just runs and I had to shut down. I have read that reducing ram frequency helps but I don't know how to do that since even bios screen doesn't open up.

I will appreciate any suggestion.

They may just not be compatible sticks what are the new sticks model?

 

[aysegulll]

They may just not be compatible sticks what are the new sticks model?

They are the same as the old ones.

 

[egda23]

Classical situation.

1. Switch off PC and disconnect from wall.
2. Do a clear CMOS. Try to boot with the 4 sticks.
3. If does not boot, try with only the 2 new sticks. If OK, you have the classic incompability between 2 kits (even with same Ref. Number)
4. If unable to use the 4 sticks , RMA the new kit and by a 64Gi kit

 

[sizzling]

They are the same as the old ones.

Mixing RAM is not guaranteed to work even when the same make and model. RAM is sold in matched kits for a reason. Here take a look at the odd man out section https://forums.tomshardware.com/faq...y-ram-and-xmp-profile-configurations.3398926/