Arris modem - correct?
Table data is taken from the Downstream Bonded Channels section - correct?
FYI - Referencing the following linkl:
https://arris.my.salesforce-sites.com/consumers/articles/General_FAQs/S33-Cable-Signal-Levels#:~:text=The three signal levels that need to be,in relation to the noise on the line.
SNR is good. > 30dB
"If
QAM64,
SNR should be 23.5 dB or greater (from the link).
Downstream Bonded Channels (from the link):
"In the
Downstream Bonded Channels section, verify
Power levels are within the acceptable range of
- 15 dBmV to + 15 dBmV for each downstream channel."
Also good.