I just upgraded my mobo, cpu, ram and AIO cooler. I see some unusual temperatures. Please see below:
Idle:
Prime95:
Cinebench:
Liquid Temp: 27 - 28 C (stays at this temp when idle or stress testing)
Room temp: 74
Here is my system:
AMD Ryzen 7800X3D
MSI MAG Tomohawk X670E Wifi
NZXT Kraken 280
1080 Ti (will be upgrading soon, hopefully)
Corsair Vengence 2x32 6000 (CL30) - Using Expo
Enthoo Evolv ATX
Fans setup:
3x Corsair ML140 PRO LED fans on top pushing air out
1x Corsair ML140 PRO LED fans in the back pushing air out
2x Corsair ML140 PRO LED fans on Kraken 280 radiator inside and 2x fans (that came with Kraken 280) on radiator outside pulling air in (I think it is called push/pull?)
Total Fans: 7
Power Setting: Performance
CPU Frequency constantly fluctuates between 4.5-4.9
These temperatures might be fine but I am also noticing that temperatures fluctuate very fast. For example, when idle (2-4% load) the temp is around 45 C, if I open an application and the CPU load jumps to 10 - 15% then suddenly the temperature shoots to 55 - 58 C. Same thing happens when load reduces and temp suddenly falls 45 C.
Is 45C idle temperature good given my setup?
Shouldn't temps increase and decrease slowly rather than this fast? Does this mean any issue (thermal paste etc)?
Is my fan setup good?
Thanks
Idle:
CPU Load | Temp |
2-4% | 43-45 C |
~10 | 55-58 C |
Prime95:
89-100% | 58 - 66 C |
Cinebench:
100% | 78 C |
Liquid Temp: 27 - 28 C (stays at this temp when idle or stress testing)
Room temp: 74
Here is my system:
AMD Ryzen 7800X3D
MSI MAG Tomohawk X670E Wifi
NZXT Kraken 280
1080 Ti (will be upgrading soon, hopefully)
Corsair Vengence 2x32 6000 (CL30) - Using Expo
Enthoo Evolv ATX
Fans setup:
3x Corsair ML140 PRO LED fans on top pushing air out
1x Corsair ML140 PRO LED fans in the back pushing air out
2x Corsair ML140 PRO LED fans on Kraken 280 radiator inside and 2x fans (that came with Kraken 280) on radiator outside pulling air in (I think it is called push/pull?)
Total Fans: 7
Power Setting: Performance
CPU Frequency constantly fluctuates between 4.5-4.9
These temperatures might be fine but I am also noticing that temperatures fluctuate very fast. For example, when idle (2-4% load) the temp is around 45 C, if I open an application and the CPU load jumps to 10 - 15% then suddenly the temperature shoots to 55 - 58 C. Same thing happens when load reduces and temp suddenly falls 45 C.
Is 45C idle temperature good given my setup?
Shouldn't temps increase and decrease slowly rather than this fast? Does this mean any issue (thermal paste etc)?
Is my fan setup good?
Thanks
Last edited: