Question ARGB not working

[xKiFz0]

Hello. I don't know where to ask for help anymore, so this is my last attempt. I bought the DARKFLASH DK351 case, which comes with four, ARGB fans. Sadly, my motherboard doesn't have an ARGB header, and I tried these steps to make them light up, and it didn't work... :
-Tried an ARGB controller
-Tried plugging the 2-pin fan header into the RESET_SW cable
-Tried plugging the 2-pin fan header into the RESET_SW motherboard header, my pc doesn't show display when it's plugged like that, for some reason.

The fans are chained into one molex for some reason, that's how it came with the case, with one 4-PIN header only, which I left unplugged since they work on molex.

 

[beyondlogic]

Hello. I don't know where to ask for help anymore, so this is my last attempt. I bought the DARKFLASH DK351 case, which comes with four, ARGB fans. Sadly, my motherboard doesn't have an ARGB header, and I tried these steps to make them light up, and it didn't work... :
-Tried an ARGB controller
-Tried plugging the 2-pin fan header into the RESET_SW cable
-Tried plugging the 2-pin fan header into the RESET_SW motherboard header, my pc doesn't show display when it's plugged like that, for some reason.

The fans are chained into one molex for some reason, that's how it came with the case, with one 4-PIN header only, which I left unplugged since they work on molex.

standard argb works on molex power but its locked.

you need a dedicated argb controller that works with remote

https://www.newegg.com/p/1YF-00SK-00071

 

[Lutfij]

You might want to go through this video;

View: https://youtu.be/5vct8cl6j54?t=412

I've time stamped it for you.

You can use an ARGB controller to manage the colors on the fans but they are horrible fans which can't be managed via the motherboard. The fact that they are daisychained with molex connectors would mean you can't control their speed.

Sadly, my motherboard doesn't have an ARGB header
For the sake of relevance, what is the make and model of your motherboard?

 

[SkyNetRising]

I tried these steps to make them light up, and it didn't work.
-Tried an ARGB controller
-Tried plugging the 2-pin fan header into the RESET_SW cable
-Tried plugging the 2-pin fan header into the RESET_SW motherboard header, my pc doesn't show display when it's plugged like that, for some reason.
The fans are chained into one molex for some reason, that's how it came with the case, with one 4-PIN header only, which I left unplugged since they work on molex.

Show photos, how you have connected the fans.
(upload to imgur.com and post link)

What motherboard are you using?
What aRGB controller are you using?

 

[xKiFz0]

Show photos, how you have connected the fans.
(upload to imgur.com and post link)

What motherboard are you using?
What aRGB controller are you using?

The fans are connected by the manufacturer through molex.
Motherboard: B450M-K ii
I'm using a cheap controller powered by sata with a 5V 3 pin header for ARGB

Ignore the cable management, it's only built to check the ARGB

https://imgur.com/a/9wHEFQW

View: https://imgur.com/a/9wHEFQW

 

[SkyNetRising]

The fans are connected by the manufacturer through molex.

And where is that chain of molex connectors connected?
Does it get connected to PSU somehow?

-Tried plugging the 2-pin fan header into the RESET_SW cable

And what was this about?
Can you show a photo of this "2-pin fan header" and "RESET_SW cable"?