Hi!
I recently did my first build, but when I turn on the PC, it runs for like 15-20sec, nothing shows up on my screen and restart itself and do this again and again. I realized that my ram and ssd is not on the mobo's QVL list (https://www.asrock.com/mb/AMD/B450M Pro4/#MemoryPR)
but as I heard it is only a recommendation, not a must.
My config:
MOBO: B450m Pro4
CPU: Ryzen 5 2600
SSD: Kingston A2000 500GB SA2000M8/500G M.2 SSD
RAM: Corsair 2x8GB DDR4 3000MHz Vengeance LPX Black CMK16GX4M2D3000C16
VGA: Asus ROG STRIX RX570 GAMING 4 GB GDDR5 256-bit
PSU: Seasonic Prime Ultra 550W 80+ Gold SSR-550GD2
Can it happen, because it is not supported? Also: Does it matter if I connect my SSD to the m2 or the ultra.m2 slot ? I plugged my rams into the A2 and B2 socket, but tried other variations as well, my pc does the same with only 1 ram, and no vga connected.
(Edit: I connect my monitor through a VGA to HDMI adapter (hdmi goes to gpu), I have every cable connected right to the mobo, )
I recently did my first build, but when I turn on the PC, it runs for like 15-20sec, nothing shows up on my screen and restart itself and do this again and again. I realized that my ram and ssd is not on the mobo's QVL list (https://www.asrock.com/mb/AMD/B450M Pro4/#MemoryPR)
but as I heard it is only a recommendation, not a must.
My config:
MOBO: B450m Pro4
CPU: Ryzen 5 2600
SSD: Kingston A2000 500GB SA2000M8/500G M.2 SSD
RAM: Corsair 2x8GB DDR4 3000MHz Vengeance LPX Black CMK16GX4M2D3000C16
VGA: Asus ROG STRIX RX570 GAMING 4 GB GDDR5 256-bit
PSU: Seasonic Prime Ultra 550W 80+ Gold SSR-550GD2
Can it happen, because it is not supported? Also: Does it matter if I connect my SSD to the m2 or the ultra.m2 slot ? I plugged my rams into the A2 and B2 socket, but tried other variations as well, my pc does the same with only 1 ram, and no vga connected.
(Edit: I connect my monitor through a VGA to HDMI adapter (hdmi goes to gpu), I have every cable connected right to the mobo, )
Last edited: