Asrock B75 Pro-3 M first start up help??

[Guest]

Hello,
I'm new to this and have just put together am Asrock B75 Pro3m. Intel G850, 8 Gb Ram. I've just tried to do the first start up and i get a screen saying ASrock with options for uefi setup, instant flash, boot menu, or tab to switch screen. Problem is i cant do anything,it starts up and gives me 5 beeps and the keyboard and mouse wont work??? Any ideas please.

 

[clutchc]

Check your motherboard manual for the beep codes to determine what 5 beeps mean.

 

[Guest]

Hi,
And did you find a solution?

 

[clutchc]

Here's what I found for beep codes for that board:

Beep Code Descriptions
1 short Memory refresh timer error.
2 short Parity error.
3 short Main memory read / write test error.
4 short System timer failure.
5 short Process error.
6 short Keyboard controller BAT test error.
7 short General exception error.
8 short Display memory error.
9 short ROM BIOS checksum error.
10 short CMOS shutdown Read/Write error.
11 short Cache Memory bad.

I also found this:

Condition Beeps Code Debug Code
Normal 1 short beep after POST With goodnight LED enabled, debug code will disappear after the beep.
Bad CPU No beep No debug code
Bad memory No beep 45
Without memory 3 long beeps 53
Without CPU No beep(No Power) No debug code
Without VGA card 5 long beeps Beeps at”d6”, then show "0d"

Nothing like vague discriptions of beep codes, huh? If your 5 beeps are short, it means process error whatever the heck that is. If they are long beeps with no gfx card installed in means... ?

Thanks for that AsRock.