ASROCK H110MV compatible with SAMSUNG 970 evo

Solution
Your board does not have M.2 slot, so you cannot connect M.2 drive directly to it. You would need PCIe adapter for that. However note that your board has only one PCIe slot bigger then x1, and it is already occupied if you have GPU. In such case, any adapter you could install would be limited to only x1 speed, which makes it totally useless - you would have to pay lots of money (for the drive and adapter) and gain speeds not much better then with normal SATA SSD. Assuming you'll find an adapter that works in PCIe x1 slot at all. Also, most likely the board will only the able to boot from NVMe drive if it is put into x16 slot (at least that's what board specification implies).
Your board does not have M.2 slot, so you cannot connect M.2 drive directly to it. You would need PCIe adapter for that. However note that your board has only one PCIe slot bigger then x1, and it is already occupied if you have GPU. In such case, any adapter you could install would be limited to only x1 speed, which makes it totally useless - you would have to pay lots of money (for the drive and adapter) and gain speeds not much better then with normal SATA SSD. Assuming you'll find an adapter that works in PCIe x1 slot at all. Also, most likely the board will only the able to boot from NVMe drive if it is put into x16 slot (at least that's what board specification implies).
 
Solution
Aug 16, 2018
2
0
10


Thanks a lot for your answer! Basically It would be better if I buy a SATA SSD like a Samsung 850 or such right?