Asus GPU Tweak II doesn't remember my fan curve settings

[PartpickingGlory]

I have an Asus 390x Strix which comes with Asus GPU Tweak II software. This card gets pretty hot and the auto fan curve doesn't properly cool the the GPU. There are three different options for fan speed you can chose from in Professional Mode: auto, manuel and user define. I usually adjust the fan curve settings by clicking on a gear next to "user define" which shows a Fan speed vs. Temperate graph that can be adjusted for optimal fan speed. When I reopen GPU Tweak after restarting my computer or simply closing GPU Tweak it forgets the particular fan curve I made for the user define settings on the graph and returns to the useless default settings. Redoing the settings every time GPU Tweak restarts is such a waste of time.

I've looked around in the main settings and there doesn't seem to be an apparent fix. Any help would be much appreciated.

PPG

 

[pete_101]

I have "GPU Tweak", not the II version, but it's probably much the same. So once you have set your fan curve you have to save it to one on the "profile" numbers (click save and select a number). Now under "settings" click on the "Tune" tab and then "Tune setting" and put a check in the box "Keep setting for next start on close application". Hopefully next time you start your computer it will remain on your last settings.

 

[93beni]

It turns out that the gpu tweak II actually DOES save your custom fan curves. The problem is that this program is kinda glitchy, however the solution is rather simple and it always work. -> Make your custom profile and set up your fan curves, then save. Obviously it stays that way UNTIL you click away on another profile or if the program restarts. When that happens, simply click away from the custom profile to another(w/e which one), then click back on your custom profile and check your setup, it's all back the way you set them up.

 

[sam_nightfire]

Download the latest version of Asus GPU Tweak II and in the settings, check the box of "Apply settings each time GPU Tweak II starts" after you have set a fan curve. That way, it will start with the custom fan curve that you set manually.