I'm stuck hope you can help out cheers.
So I read on here a post about putting a new SSD in the old motherboard in title, so I bought a PCI adapter and put 500GB drive in PCIe2.
All worked well, booting up ok, except not recognizing all my RAM now.
Before adding the SSD, I had 2x8GB corsair cards in the 2 red slots (pics attached), and it was picked up ok in OS as 16gb total, all was well.
Now the system will only accept, boot up, and 'see' 1 x 8GB memory card in DIMM_B1?
If I put the both cards in the red slots like I had it running before, and as in the manual, pg 1-10, it wont boot at all, powers down immediately.
I have the both cards in B1 and B2, only way it will boot, but it only sees one card in B1 in the OS.
(photos below).
Windows 10 Pro 64-bit
Haswell 22nm Technology RAM
8.00GB Single-Channel DDR3 @ 801MHz (9-9-9-24)
Motherboard
ASUSTeK COMPUTER INC. MAXIMUS VII HERO (SOCKET 1150) 29 °C
Graphics
PL2209HD (1920x1080@60Hz)
2047MB NVIDIA GeForce GTX 760 (ASUStek Computer Inc) 29 °C
Storage
931GB Seagate ST1000DM010-2EP102 (SATA ) 34 °C
931GB Seagate ST1000DM010-2EP102 (SATA ) 33 °C
465GB Crucial CT500P3SSD8 (Unknown (SSD))
RAM
Memory slots
Total memory slots 4
Used memory slots 2
Free memory slots 2
Memory
Type DDR3
Size 8192 MBytes
Total Physical 7.94 GB
Available Physical 4.32 GB
Total Virtual 12 GB
Available Virtual 7.31 GB
SPD Number Of SPD Modules 2
Slot #1
Type DDR3
Size 4096 MBytes
Manufacturer Corsair
Max Bandwidth PC3-10700 (667 MHz)
Part Number CMZ8GX3M2A1600C9
Slot #2
Type DDR3
Size 4096 MBytes
Manufacturer Corsair
Max Bandwidth PC3-10700 (667 MHz)
Part Number CMZ8GX3M2A1600C9
Please shout if anyone needs any more info, cheers
System was built in 2018 sometime, had zero problems, very reliable, changed a HDD last summer.
New Thermalright Phantom Spirit 120 current bios is 3103, tried 3201 and 3503 is the latest Beta.
So I read on here a post about putting a new SSD in the old motherboard in title, so I bought a PCI adapter and put 500GB drive in PCIe2.
All worked well, booting up ok, except not recognizing all my RAM now.
Before adding the SSD, I had 2x8GB corsair cards in the 2 red slots (pics attached), and it was picked up ok in OS as 16gb total, all was well.
Now the system will only accept, boot up, and 'see' 1 x 8GB memory card in DIMM_B1?
If I put the both cards in the red slots like I had it running before, and as in the manual, pg 1-10, it wont boot at all, powers down immediately.
I have the both cards in B1 and B2, only way it will boot, but it only sees one card in B1 in the OS.
(photos below).
Windows 10 Pro 64-bit
Haswell 22nm Technology RAM
8.00GB Single-Channel DDR3 @ 801MHz (9-9-9-24)
Motherboard
ASUSTeK COMPUTER INC. MAXIMUS VII HERO (SOCKET 1150) 29 °C
Graphics
PL2209HD (1920x1080@60Hz)
2047MB NVIDIA GeForce GTX 760 (ASUStek Computer Inc) 29 °C
Storage
931GB Seagate ST1000DM010-2EP102 (SATA ) 34 °C
931GB Seagate ST1000DM010-2EP102 (SATA ) 33 °C
465GB Crucial CT500P3SSD8 (Unknown (SSD))
RAM
Memory slots
Total memory slots 4
Used memory slots 2
Free memory slots 2
Memory
Type DDR3
Size 8192 MBytes
Total Physical 7.94 GB
Available Physical 4.32 GB
Total Virtual 12 GB
Available Virtual 7.31 GB
SPD Number Of SPD Modules 2
Slot #1
Type DDR3
Size 4096 MBytes
Manufacturer Corsair
Max Bandwidth PC3-10700 (667 MHz)
Part Number CMZ8GX3M2A1600C9
Slot #2
Type DDR3
Size 4096 MBytes
Manufacturer Corsair
Max Bandwidth PC3-10700 (667 MHz)
Part Number CMZ8GX3M2A1600C9
Please shout if anyone needs any more info, cheers
System was built in 2018 sometime, had zero problems, very reliable, changed a HDD last summer.
New Thermalright Phantom Spirit 120 current bios is 3103, tried 3201 and 3503 is the latest Beta.
Last edited: