Asus motherboard Z10PE-D8 WS ( LED error bf ) urgent help needed

[bobotheseal]

Hi
I just build my PC suddenly my pc start but My monitor is black and LED on motherboard stuck at ( bF)
what I did so far :
1- Removed the battary form motherboard for a few seconds
2-Cleared the bios ram by moving the jumper for a few seconds
3-Updated the bios to the latest driver using USB Bios flashback
4-Remove video card and replaced it with another one ( same problem)
5-Changed the Card PCIe slot to another one ( same problem)

My configurations :

1-Dual Intel Xeon E5-2680 V3 2.5GHz
2-Asus Z10PE-D8 WS SSI EEB motherboard
3-2X Crucial 64GB (4 x 16GB) Registered DDR4-2133
4-Intel 750 Series 400GB PCI-E Solid State Drive
5-Zotac GeForce GTX 980 Ti 6GB
going to use this workstation for VFX simulation

This is the Q_CODE I got from motherboard using my USB stick I can't understand anything from it
Power ON
000F:01
0000:65
0008:01
0002:0B
0003:35
0006:01
0004:64
0006:FF
0019:FF
0011:01
0014:FF
00A1:02
00A3:02
00A7:02
00A9:01
00AA:05
00AB:01
00AC:04
00AD:01
00AF:FF
00B0:FF
00B1:27
00A1:01
00AF:--
RESET
000F:01
0000:62
0002:0A
0003:45
0006:03
0004:FF
0014:01
0019:FF
0013:01
0014:FF
00A1:01
00A3:02
00A7:03
00A9:02
00A7:02
00A8:01
00A9:01
00AA:02
00AE:01
00AF:FF
00BF:01
00B0:FF
00B1:41
00B4:56
00B2:FF
00FF:01
00B1:FF
00B3:0A
00B6:FF
00B7:FF
00BD:FF
00B7:01
00BD:FF
00B7:01
00BD:FF
00B7:01
00BD:FF
00B7:04
00BD:FF
00B7:01
00BD:FF
00B7:01
00BD:FF
00B7:09
00B8:01
00B7:04
00B9:FF
00BA:FF
00B7:03
00BF:--
Power OFF
DUMP Finish

Thank you for help!

 

[corndog1836]

what does the led light on the motherboard read -- example = AO

does it read bf and stays at bf?
can you get to bios?
I assume you cant get to windows,, right?


its a memory code...

 

[bobotheseal]

what does the led light on the motherboard read -- example = AO

does it read bf and stays at bf?
can you get to bios?
I assume you cant get to windows,, right?


its a memory code...

Hi corndog1836
thank you for reply .. I found out that the motherboard is defective!
one of the two possessor slot is the reason for this message I'm going to send it back
Thanks

 

[corndog1836]

Bf code is cpu/memory code. It means cpu pins or memory modules arent communicating properly.. either they are not pushed in all the way or the motherboard is bad... in your case it was the motherboard. .. i am glad you found it

 

[corndog1836]

Well i guess this thread is solved...hahaha