ASUS Sabertooth 990fx VS. ASUS CROSSHAIR V Formula for AMD FX-8350

yoyodolo

Reputable
May 29, 2014
103
0
4,710
Hey guys,
I'm gonna build a gaming pc my hardware config is as below;

AMD FX-8350
Cooler master hyper 212x cpu cooler
Sapphire 270x boost oc 2gb
corsair vengeance 2x8gb ram
wd caviar green 1tb hdd
Corsair vs650
3 extra cabinet fans

please help me to know, which mobo is better for this rig?

Asus sabertooth 990fx OR ASUS CROSSHAIR V Formula?
 
Solution


Which still means there's no point in spending your money on a motherboard.

Get the FX-8350, decently cheap motherboard, a Hyper 212 EVO, 8GB of RAM, and a good power supply; you only need a 550w one, but it needs to be well-made.

Those parts won't have to be upgraded.

With the money that you save from not buying a ridiculous motherboard, you can get a Western Digital Blue, which is a much better option, AND probably either a cheap SSD or a better video card.

There are far better places to spend your money than on a motherboard that gives little to no benefit.

'Green' WD drives are better used for HTPC, data storage and backups ... a 'Blue' or 'Black' WD (with an SSD for the OS?) is a better solution.

The Sabertooth is a fine mobo -- actual gains may be marginal moving up to the CHV unless you are a crazsy OC tweaker :eek:

 

yoyodolo

Reputable
May 29, 2014
103
0
4,710


so which mobo should I buy?
well I'll upgrade other components in future...
 
If you're upgrading, you wouldn't be able to keep the motherboard, because any upgrade past the fx 8350 on AMD's lineup, is just an overclocked 8350. You'd have to do a whole switch to intel, which would be pretty costly.

As for a straight answer to your question, the sabertooth is overkill alerady. If you want to stick with AMD, just get that if you want a high end motherboard, otherwise get a gigabyte 970a ud3p (if you don't need crossfire/SLI)
(http://pcpartpicker.com/part/gigabyte-motherboard-ga970aud3p)

or MSI 970 gaming (if you want SLI/Crossfire).
(http://pcpartpicker.com/part/msi-motherboard-970gaming)
 

yoyodolo

Reputable
May 29, 2014
103
0
4,710

I'll stick to AMD, But yes I'll upgrade other components for sure..

 


Which still means there's no point in spending your money on a motherboard.

Get the FX-8350, decently cheap motherboard, a Hyper 212 EVO, 8GB of RAM, and a good power supply; you only need a 550w one, but it needs to be well-made.

Those parts won't have to be upgraded.

With the money that you save from not buying a ridiculous motherboard, you can get a Western Digital Blue, which is a much better option, AND probably either a cheap SSD or a better video card.

There are far better places to spend your money than on a motherboard that gives little to no benefit.

 
Solution

yoyodolo

Reputable
May 29, 2014
103
0
4,710


Thanks But I'll not buy another mobo, please help me to buy one of them, give your recommendation for one them and explain why it is better than other..
 

jzazmann

Reputable
Aug 13, 2014
1
0
4,510
If you get the sabertooth 990fx r2 gen 3 you will have pcie 3.0 support if you plan on upgrading you graphics card. It's a great board too, just as good at oc as formula z. got one myself!
 

speely

Reputable
Aug 11, 2014
32
0
4,530


Yes, but it's not really PCI-E 3.0 support, technically. It's an added-on chip that still interfaces with the CPU via PCI-E 2.0 lanes, iirc.
 

IamJesus

Reputable
Aug 14, 2014
1
0
4,510
Try the 990FXA-UD3 by Gigabyte it is $128 on Newegg compared to $185 for the Sabertooth. Take the money you saved and get an R9 280x, you can get a new one from Sapphire for $280 and it might be an error but you can get the same card I think for $250 also on Newegg right now.
In case you want to know my rig is:
FX-8320
Gigabyte 990FXA-UD3
8 GB 2x4GB Kingston Hyperx Beast
Samsung 840 EVO 120GB
WD Black 1TB
XFX PRO 850W
XFX R9 280X
It is completely black
 

speely

Reputable
Aug 11, 2014
32
0
4,530


Nice choice. Just so happens, that's the exact board I'm currently using as well. Stuck a 4350 in it and Crossfire'd XFX 7850 1gb's.

Love it. Except for the lack of 4-pin PWM fan headers.