Question Z690 Aorus Ultra Giving a code 04 or D4

[Sir Chadwick]

I just installed a new CPU cooler, and noticed that after turning my pc back on I was getting a new code on the motherboard readout. When I check the motherboard manual I cant see a code 04 listed anywhere, however, I can see that there is an error listed with a code D4. The error it lists says "PCI resource allocation error. Out of Resources." I am not really 100% sure what this means and am wondering what could cause/fix such a code.

 

[Lutfij]

I just installed a new CPU cooler,
Make and model of your cooler? What processor are you working with? Might want to relieve some pressure from the mounting of your cooler and see if the issue persists.

 

[Sir Chadwick]

I just installed a new CPU cooler,
Make and model of your cooler? What processor are you working with? Might want to relieve some pressure from the mounting of your cooler and see if the issue persists.

I just bought a Thermalright Spirit 120 EVO, and running with a i5-12600k. The installation guide did not mention any instructions on how many rotations to screw or any other instructions to be sure that the cooler is properly tightened.

From what I can see based on the code and the motherboard's manual I would not think that it is a problem with overtightening unless that could somehow affect the PCI slots or how the cpu recognizes anything in said slots.

Also I should have mentioned that I did have to remove my graphics card to help install the new cooler, and then re-install the card which is a 3070.

 

[Dark Lord of Tech]

Reseat your memory modules and the GPU. Might help.