Hey guys!
Never had any issues in past with my GPU, never mined with it, I'm not even a big gamer, but recently since installing the new FIFA I started noticing plenty of problems.
First started tracking GPU temperature and noticed that in the game it would go up to 90 degrees Celsius.
At Idle it was 60. But it was still playable.
Also, it was showing 0rpm for fans, which was sus, so I decided to inspect it visually to notice that one fan wasn't working.
Decided to get another one in case that was directly pushing air in GPU which resulted in temps going up to 80 in games, which was alright...
For a month or two.
Suddenly temps increased again and now it was fully unplayable. It would literally go from 60 to 90 in 3 minutes and the games would start to lag(in all games).
So I changed thermal paste, for the first time ever after 5 years, and cleaned the dust, had some Cooler master thermal p.
Temps went like 15 celsius lower and I was very excited just to notice a few hours later it is going crazy again.
After some googling, decided to get another thermal paste, mx 6 which should be very good.
Started pc, and at idle it was around 45 great, in-game it was 75-80, with fps dropping every 10 sec from 90-100 to 30 and going back, which was also sus because never had those issues before.
What was good is that the amd overlay was showing the right GPU fan rpm, but I forgot to check did the other fan suddenly started working (btw that fan is wobbly).
RPM was going to around 1000, and when I tried to increase it to 1500 it was so loud I couldn't stand it.. literally too loud. (maybe the other fan that's not working suddenly started working?)
Left it at default in Adrenaline software.
A few hours later it's showing only 100 rpm even in games, temps are again going up to 90.
Restarted pc, showing 0 rpm and tried with other software like msi burner to control fan speed, not working, but ik its working...
Ordered another fan but it's coming from China in like a month...
Planning on buying a new GPU but waiting for like 4060 or 7600 xt, maybe will be forced to get 6650xt earlier.
Any ideas?? Fully removed drivers and installed new ones, and nothing changed.... is my GPU dying or is the other fan confusing software, or idk?
Never had any issues in past with my GPU, never mined with it, I'm not even a big gamer, but recently since installing the new FIFA I started noticing plenty of problems.
First started tracking GPU temperature and noticed that in the game it would go up to 90 degrees Celsius.
At Idle it was 60. But it was still playable.
Also, it was showing 0rpm for fans, which was sus, so I decided to inspect it visually to notice that one fan wasn't working.
Decided to get another one in case that was directly pushing air in GPU which resulted in temps going up to 80 in games, which was alright...
For a month or two.
Suddenly temps increased again and now it was fully unplayable. It would literally go from 60 to 90 in 3 minutes and the games would start to lag(in all games).
So I changed thermal paste, for the first time ever after 5 years, and cleaned the dust, had some Cooler master thermal p.
Temps went like 15 celsius lower and I was very excited just to notice a few hours later it is going crazy again.
After some googling, decided to get another thermal paste, mx 6 which should be very good.
Started pc, and at idle it was around 45 great, in-game it was 75-80, with fps dropping every 10 sec from 90-100 to 30 and going back, which was also sus because never had those issues before.
What was good is that the amd overlay was showing the right GPU fan rpm, but I forgot to check did the other fan suddenly started working (btw that fan is wobbly).
RPM was going to around 1000, and when I tried to increase it to 1500 it was so loud I couldn't stand it.. literally too loud. (maybe the other fan that's not working suddenly started working?)
Left it at default in Adrenaline software.
A few hours later it's showing only 100 rpm even in games, temps are again going up to 90.
Restarted pc, showing 0 rpm and tried with other software like msi burner to control fan speed, not working, but ik its working...
Ordered another fan but it's coming from China in like a month...
Planning on buying a new GPU but waiting for like 4060 or 7600 xt, maybe will be forced to get 6650xt earlier.
Any ideas?? Fully removed drivers and installed new ones, and nothing changed.... is my GPU dying or is the other fan confusing software, or idk?