Question Asus x570 D.O.C.P stability

[bigcooljesus]

Just upgraded my ITX to an Asus Strix x570-i Gaming mobo (with an AMD 3700X) and G.SKILL TridentZ 16GB (2x8GB) 3600Mhz RAM (F4-3600C16D-16GTZKW) which is on the vendor approved list.

Everything works fine stock, but if I enable D.O.C.P (to use the XMP profile of the RAM) and then reboot to apply the settings, 9 times out of 10 the PC never boots up (black screen) and the Asus diagnostic LED is Orange, indicating a DRAM issue. When it does boot up, it works just fine.

From a Google search, it appears others have had issues with using DOCP. As the RAM is new, should I return it and try a lower frequency RAM (say 3000Mhz) or is this an issue that probably won't be resolved even with different RAM?

 

[GarrettL]

I briefly tried some 2x8GB 3600 GSkill Ripjaws on Asus x570 TUF with DOCP, was getting blue screens.

Id imagine a slight bump up in the voltage would be the likely route but didn’t Google it yet to see.

 

[bigcooljesus]

Using 3000Mhz memory (Corsair LPX Vengeance) has been working perfectly with DOCP.

 

[GarrettL]

My 3200MHz Corsair Vengeance 2x8GB runs without issue with DOCP enabled.

Go figure....