Asus z270-k Prime not posting.

[masterCuk]

I built a new PC with an Asus Z270-k MB and a Kaby Lake I5-7600k CPU.
The computer [strike]boots[/strike] starts up (LEDs, fans and HDDs have activity, but no video signal is shown at all).
Tested with integrated and discrete video cards, and with or without RAM

Any suggestions will be greatly appreciated.

 

[alexoiu]

Try leaving single RAM module installed, graphics card removed. Test each slot.
What video cable using to connect the monitor (not tv)?

 

[masterCuk]

Try leaving single RAM module installed, graphics card removed. Test each slot.
What video cable using to connect the monitor (not tv)?

Thanks. I am using 2 sticks of Geil DDR4 3000 mhz RAM. I tested with both on slots 1 and 3 and slots 2 and 4 to.no success.
I will try with one stick only.

I tried also with a discrete video card and with the integrated one, thru their DVI ports.

 

[masterCuk]

Found the issue... by default, the mobo outputs the video signal thru VGA port of the integrated video card. Had to look for an older monitor to be able to get to BIOS screen... from there, i was able to configure everything else.

Thanks for the help!

 

[alexoiu]

No problem.

 

[majinsnake]

I have the same motherboard and processor. My motherboard posted fine outside of the case. After six hours of trying to put it in the case and troubleshoot, It is working fine.

 

[dursi]

I built a new PC with an Asus Z270-k MB and a Kaby Lake I5-7600k CPU.
The computer [strike]boots[/strike] starts up (LEDs, fans and HDDs have activity, but no video signal is shown at all).
Tested with integrated and discrete video cards, and with or without RAM

Any suggestions will be greatly appreciated.

Please can you tell me which BIOS version your MB has? I have similar issue and it seems that BIOS version is problem. My version is 1009.