Question Asus z370-p with ripjaws 3600mhz freezes.

Jan 5, 2023
18
0
10
Hello everyone need help..!!!!

I have asus prime z370-p paired with i5 8400.....
I was using 8gb adata c22 3200mhz ram single stick...
Pc was flawlessly working fine no issue no freezing no bsod just perfect performance.....
Coz of less memory i bought

Ripjwas 16gb c18 8x2 sticks 3600mhz.....
My board supports 4000mhz oc
Using them On 1 3 slots
It worked fine everything was but freezes on games or sometime on desktop just after boot...sometimes it runs 2 3 hours flawless on 3600 after shutdown it won't give display pc leds fans turns on,after 5 6 time forcefully pressed power button it turns on and error of forcefully turned off goes to bios n rams are on default 2133mhz....then settings bios to default it runs again tried xmp
, auto, manual settings but no luck
Tried 2666, 3000, 3200, 3600 but same bsod or freezes tried single stick too but same issue none of the settings are reliable its so annoying in middle of work it crashes....n take 10mins to boot...
What settings should i try?
My rams are faulty or my board? Or my settings are? 3200mhz were on auto xmp was off.....
Bios are newest....550w psu
I am really mentally tiered
Please help me out......

Regards thanks in advance
 
Welcome to the forums, newcomer!

Using them On 1 3 slots
Per your motherboard manual, you should be populating slots A2 and B2. Is that what you're referring to as slots 1 and 3?

Bios are newest
This is where you state the version. If you performed a successful BIOS update recently, did you try clearing the CMOS soon after?

550w psu
550W is the advertised wattage of the unit. What is the make and model of the unit as well as it's age?

Ripjwas 16gb c18 8x2 sticks 3600mhz
If you're not mixing this with your Adata stick of ram. can you please pass on a link to the ram kit you're working with?
 
Thanks for welcoming me.....and helping me out.....

Psu: HEC 500TE 2wx..recently bought never heard about this psu but it was the only available that time, after ram issue8i....(500w)

Rams: no i am only using g.skill ripjaws only two sticks....yes a2 n b2 tried all combos too...single single sticks too....

F4-3600C18D-16GVK
Ripjaws V
DDR4-3600 CL18-22-22-42 1.35V
16GB (2x8GB)
https://www.gskill.com/product/165/184/1562832515/F4-3600C18D-16GVK

I tried 1.35v on 3200mhz but didnt turned on......now its on default 2133 rest all auto.....

Bios: 3004
 
Last edited:
Welcome to the forums, newcomer!

Using them On 1 3 slots
Per your motherboard manual, you should be populating slots A2 and B2. Is that what you're referring to as slots 1 and 3?

Bios are newest
This is where you state the version. If you performed a successful BIOS update recently, did you try clearing the CMOS soon after?

550w psu
550W is the advertised wattage of the unit. What is the make and model of the unit as well as it's age?

Ripjwas 16gb c18 8x2 sticks 3600mhz
If you're not mixing this with your Adata stick of ram. can you please pass on a link to the ram kit you're working with?

I did a cmos clear through jumper and taking off the battery too....surprisingly its working on 3600 now and i worked for 4 hours and then played farcry for 1 hour no errors so far...did prime95 stress test too for about 10mins and no error yet hope its fixed now hopping it will run smooth now on xmp profile.....thanks for ur help will get back if something happens again cheers...!!!!
 
Welcome to the forums, newcomer!

Using them On 1 3 slots
Per your motherboard manual, you should be populating slots A2 and B2. Is that what you're referring to as slots 1 and 3?

Bios are newest
This is where you state the version. If you performed a successful BIOS update recently, did you try clearing the CMOS soon after?

550w psu
550W is the advertised wattage of the unit. What is the make and model of the unit as well as it's age?

Ripjwas 16gb c18 8x2 sticks 3600mhz
If you're not mixing this with your Adata stick of ram. can you please pass on a link to the ram kit you're working with?


Again bsod appeared and stuck on startup......