Athlon 200 GE + ASROCK A320M-HDV Not Signal

Status
Not open for further replies.

ijoin

Distinguished
May 3, 2014
61
0
18,530
Hi
I just build pc with these spec
AMD ATHLON 200GE
ASROCK A320M-HDV with BIOS P5.10 (OCT 2018 UPDATE)
CORSAIR VENGEANCE DDR4 LPX PC21000 2X4GB CMK8GX4M2A2666C16
GIGABYTE SSD 240 GB
COUGAR GAMING 400W VTE400

Assembeld the whole system and connected it to dsub monitor, pc booted up, cpu fan works well, but no display output at all

Any help?
 

ijoin

Distinguished
May 3, 2014
61
0
18,530
So, in the case if the bios is not updated it will only show no signal at all, just wonder
I read a post at a yt video and it's said that he didnt need to update the bios at all

oh and the packaging box, there is an AMD RYZEN DESKTOP 2000 READY sticker, I looked it up at google and found it means that the BIOS is the latest and support the newest APU chip


edit
just checked the bios version, found out it's p5.10 update (can find it on the board)
so its pretty new
 

ijoin

Distinguished
May 3, 2014
61
0
18,530


I tested it with HDMI Monitor, single RAM, all the possibilities
Still no signal
 

LB3

Honorable
Apr 25, 2014
141
1
10,715
I also just built a 200GE system. I hadn't used AMD in a LONG time. My local Micro Center tech advised me that the 200GE is only supported by 400-series chipsets (B450 or X470). Unfortunately, A320 was not listed on the supported chipset list for the 200GE.
Are you able to get into the BIOS? Is it just Windows where the monitor goes blank?
 

LB3

Honorable
Apr 25, 2014
141
1
10,715


Great! Same thing worked for me... the box says "Ryzen 2000 ready" but that's a lie. Doesn't work without BIOS update.
 
Apr 26, 2019
3
0
10
I see.

I was reading about it and it seems the problem is with the APU of the 200 GE. Plugging in a GPU or trying to flash it "blindly" by pressing F6 a few seconds after boot and "selecting" the bios version from the flash drive won't work, right?

I guess I will try to find someone who has a compatible CPU and I can borrow for this.
 

ijoin

Distinguished
May 3, 2014
61
0
18,530
I see.

I was reading about it and it seems the problem is with the APU of the 200 GE. Plugging in a GPU or trying to flash it "blindly" by pressing F6 a few seconds after boot and "selecting" the bios version from the flash drive won't work, right?

I guess I will try to find someone who has a compatible CPU and I can borrow for this.
I made some USB flash tool to flash the BIOS
Want to share the file, but I can't find it anymore in my pc
Seems to be deleted since I found no use for it anymore
 
Status
Not open for further replies.