Hello fellow tech enthusiasts, first time posting here after failing to get answers elsewhere about an issue I have been having with the PC of my brother that I've been troubleshooting.
Ever since we had a power outage about a month ago the system has on occasion failed to boot properly - not sending a signal to the monitor, usually turning off and back on the PSU has done the trick (got this from a Microsoft thread).
However, last weekend the problem worsened to an 'unfixable' state. At this point I suspect the issue is PSU related (which has always been on the absolute limit in terms of wattage (650, gold cert) compared to what its powering (10700K and RX6950 XT combo).
The error that has currently been the most persistent throughout all attempts to identify the issue has been 'B4', as indicated by the debug LED (ASUS ROG Z490E motherboard). Per the manual, this means ''USB Hot Plug''.
I have attempted a few permutations:
At this point I think it is safe to conclude the PSU might have taken a hit after the aforementioned power outage, or is there something I am overlooking at this point?
Beyond this I am honestly stumped, and I'd rather first try the 'cheap' option of just a new PSU rather than concluding the motherboard has an issue (which was my initial thought considering it gave 'USB Hot Plug' errors without anything in the rear IO.
Thanks in advance. I won't be looking at this thread for ~9-10 hours considering its late in the evening at the time of posting, but I'll make sure to come back to any comments!
Partlist:
MoBo: ASUS ROG STRIX Z-490E
CPU: Intel i7 10700K
GPU: AMD RX6950 XT
RAM: 4x 8GB
PSU: Corsair RM650x
Ever since we had a power outage about a month ago the system has on occasion failed to boot properly - not sending a signal to the monitor, usually turning off and back on the PSU has done the trick (got this from a Microsoft thread).
However, last weekend the problem worsened to an 'unfixable' state. At this point I suspect the issue is PSU related (which has always been on the absolute limit in terms of wattage (650, gold cert) compared to what its powering (10700K and RX6950 XT combo).
The error that has currently been the most persistent throughout all attempts to identify the issue has been 'B4', as indicated by the debug LED (ASUS ROG Z490E motherboard). Per the manual, this means ''USB Hot Plug''.
I have attempted a few permutations:
- GPU removed, peripherals (USB) connected; PC boots properly.
- GPU in PCIe slot 1, peripherals removed; PC boots correctly.
- GPU in slot 1, peripherals connected; PC doesn't boot correctly.
- GPU in slot 2, peripherals removed; PC boots correctly.
- GPU in slot 2, peripherals connected; PC once again doesn't boot correctly.
At this point I think it is safe to conclude the PSU might have taken a hit after the aforementioned power outage, or is there something I am overlooking at this point?
Beyond this I am honestly stumped, and I'd rather first try the 'cheap' option of just a new PSU rather than concluding the motherboard has an issue (which was my initial thought considering it gave 'USB Hot Plug' errors without anything in the rear IO.
Thanks in advance. I won't be looking at this thread for ~9-10 hours considering its late in the evening at the time of posting, but I'll make sure to come back to any comments!
Partlist:
MoBo: ASUS ROG STRIX Z-490E
CPU: Intel i7 10700K
GPU: AMD RX6950 XT
RAM: 4x 8GB
PSU: Corsair RM650x