Hi
I purchased a B650M D3HP and a 8600G and I can't make them work. I got a black screen on the monitor, no signal. Also motherboard doesn't do any beep sounds.
I tryed with different HDMI cable, different monitor, switching rams to other slots, using only 1 ram module in A2 channel as manual says etc... I tryed everything.
My las try was supossing that motherboard wasn't updated to last bios, because 8000 series processors are only compatible if BIOS is v20 or above, and this motherboard has q-flash plus button, that let's you update a bios without CPU, RAM, SCREEN, ETC... so I downloaded the last bios, formatted an USB to Fat32 and renamed the last bios to GIGABYTE.BIN and put the bios on the usb disk, but when I press the q-flash plus button, the q-flash led starts blinkin and after 15-20 secs stops and the motherboard shuts down. That is not normal, because the update should take about 5 minutes. After that the black screen is still there.
If I start the computer without q-flash mode, it keeps alive with fans moving, but without any beeps and without signal, simply black screen.
I'm totally confused, don't know what more to try.
Can someone help me please?
EDIT:
Solved... using a 2GB old pendrive with usb 2.0 interface for the q-flash plus utility. Using a 3.0 usb pendrive with 32Gb was the problem, can't understand why...
I purchased a B650M D3HP and a 8600G and I can't make them work. I got a black screen on the monitor, no signal. Also motherboard doesn't do any beep sounds.
I tryed with different HDMI cable, different monitor, switching rams to other slots, using only 1 ram module in A2 channel as manual says etc... I tryed everything.
My las try was supossing that motherboard wasn't updated to last bios, because 8000 series processors are only compatible if BIOS is v20 or above, and this motherboard has q-flash plus button, that let's you update a bios without CPU, RAM, SCREEN, ETC... so I downloaded the last bios, formatted an USB to Fat32 and renamed the last bios to GIGABYTE.BIN and put the bios on the usb disk, but when I press the q-flash plus button, the q-flash led starts blinkin and after 15-20 secs stops and the motherboard shuts down. That is not normal, because the update should take about 5 minutes. After that the black screen is still there.
If I start the computer without q-flash mode, it keeps alive with fans moving, but without any beeps and without signal, simply black screen.
I'm totally confused, don't know what more to try.
Can someone help me please?
EDIT:
Solved... using a 2GB old pendrive with usb 2.0 interface for the q-flash plus utility. Using a 3.0 usb pendrive with 32Gb was the problem, can't understand why...
Last edited:
Facebook
Twitter
Instagram