Question be quiet Dark Rock Pro 5 fan problem

[knatora]

Hello today 1 of my cpu cooler far start to make loud noises ( the problem was 1st 120 mm fan ).

https://imgur.com/a/P9xwigY

View: https://imgur.com/a/P9xwigY
it say it is silent wing 4 model.

I wanted to swap it with my old one just for moment and here is the problem :

the connectcot :

Original silent wing 4 connector :

https://imgur.com/a/FRU4yLu

View: https://imgur.com/a/FRU4yLu


my old silent wing 3 connector :

https://imgur.com/a/A8Mlkcz

View: https://imgur.com/a/A8Mlkcz


it cant be plug it with the middle one .

I was looking on yt how does silent wing 4 connector look like and i found this :

View: https://youtu.be/Y6U0YOsNBsk?t=276


Its look same as my old sw3 one so i wont be able to plug it in. I was on be quiet web to look for fan for this cooler but they only got 1 120 mm model that i can buy in my online shops. It is there any diff mode of silent wing 4 just for dark prock pro 5?


update : There is only 1 cpu fan connector at my mb ( gigabyte x470 aorus wifi 7)

Thx for any help and info

 

[Lutfij]

If you look at their installation video;

View: https://youtu.be/CP0AVkjDHSg?t=121

you'll see that the fans used on the cooler are proprietary due to the fact that there's a fan controller built into the cooler's tower cowl. You could pick up 140mm and 120mm PWM fans respectively and then daisychain them to your motherboard's CPU_FAN header or if your board has a CPU_OPT fan header, you can pair one of the two fans for the cooler to it.

If you want to stick to the cooler's specs, for the sake of purity, you might want to contact Be Quiet!(courtesy of an email) and see if they can ship out replacement fans for your cooler. You might need to show proof of purchase(maybe).

 

[dwd999]

You're probably not going to like this suggestion: if you can buy them where you live get a couple of Noctua NF-A12x25 PWM chromax.black.swap fans. Your motherboard manual says there are 2 cpu fan headers so you can hook them up directly to that.