Beats Wireless - Only one side works on Bluetooth, Both sides work on a wired connection

[DearlyDeparted]

Hi Forum,

I recently got a pair of Beats wireless (2013 model) handed to me to fix, but I can't figure out the problem.

On bluetooth only the right side (controller side) works the other is dead.., but when i plug them in using the 3mm jack both side work perfectly.

I'm guess is they are not under warranty and can't be returned. I also tried the reset method on the beats support site, but the headphones just don't want to do it.

Thanks for any and all help.

 

[The Comments]

THIS WORKS WITH ALL BEATS SOLOS:

I had the same issue. Managed to fix it just by touching the headphone jack cable slightly while playing via Bluetooth. Yes I know that may sound weird. But I guess it could be some connection issue. follow the steps:

1 - Connect via bluetooth;
2 - Hit play in any track;
3 - put the headphones on; (only one side should be playing)
4 - Get the jack cable. both sides should not be connected to anything;
5 - Slowly touch one end of the cable in the jack, suddenly you will notice the other side starts playing.

But if you continue playing around with the jack you will notice that stops. Anyway, that worked for me.

this I the solution. Works for me and my Cowin E7s. Just jiggle the aux chord in the socket and push at different angles and you'll get audio again.

 

[mrmizzou97]

Hi Forum,

I recently got a pair of Beats wireless (2013 model) handed to me to fix, but I can't figure out the problem.

On bluetooth only the right side (controller side) works the other is dead.., but when i plug them in using the 3mm jack both side work perfectly.

I'm guess is they are not under warranty and can't be returned. I also tried the reset method on the beats support site, but the headphones just don't want to do it.

Thanks for any and all help.

Hey man! I was having the same problem with bluetooth with my computer. I looked in my bluetooth settings and found that somehow my audio settings got panned completely to one side. I put it back in the middle and it fixed it! Hope this hopefully helps you, or at least someone having this issue!
Jerron

 

[randogg2002]

Thanks that worked for me I had the aux cord plugged in the took them out quick and immediately turn Bluetooth in it’s wirki again

 

[loz.mab8]

I had the same issue. Managed to fix it just by touching the headphone jack cable slightly while playing via Bluetooth. Yes I know that may sound weird. But I guess it could be some connection issue. follow the steps:

1 - Connect via bluetooth;
2 - Hit play in any track;
3 - put the headphones on; (only one side should be playing)
4 - Get the jack cable. both sides should not be connected to anything;
5 - Slowly touch one end of the cable in the jack, suddenly you will notice the other side starts playing.

But if you continue playing around with the jack you will notice that stops. Anyway, that worked for me.

This just worked for me!! After everything else didn’t, I just used the aux lead (not connected to anything) and tapped around the earphone insert hole whilst playing music. Sound back in both ears, how bizarre!!
Thank you !

 

[terry051955]

Jack in Bluetooth off back on jack in Bluetooth off back on working perfect

 

[joeeezy]

I had the exact same problem. After trying resetting, aluminum foil, using the plugging technique, etc. without solving the issue and just getting sloppy results (just one side working, connecting via bluetooth but no sound ) I took apart the right side of the headphones, then pushed gently the little metal sheets of the plug. I believe the malfunction was due to wear and bad contact of the cable plug that made the headphones act all funny. Anyway, I did that and they are working just fine, both bluetooth and aux cord. Be careful because there are several tiny cables welded to the board and can be broken easily. Hope this helps.