Question Beelink SER8 Mini PC --- Hold-Up Time for UPS ?

[Shuri2060]

I have recently purchased a Beelink SER8 Mini PC and now I'm looking for an Uninterruptible Power Supply.

I am considering getting a BLUETTI AC2A Portable Power Station which states 'Seamless UPS in 20ms', which would double as a power supply for travel.

I can't tell from the info I see online whether 20ms would be sufficient for the SER8, could I have some help on this ?

 

[Ralston18]

20 ms may be too long without the Mini PC shutting down....

= = = =

Google "ups transfer times".

Switchover time is another phrase that is used.

Also:

How long do you expect or require the Beelink SER8 Mini PC to run on the AC2A UPS without any other immediate sources of power?

Have you read the AC2A User Manual ?

https://cdn.shopify.com/s/files/1/0..._AC2A_PLP013-6D03A2_23.11.23.pdf?v=1703745346

 

[Shuri2060]

20 ms may be too long without the Mini PC shutting down....

= = = =

Google "ups transfer times".

Switchover time is another phrase that is used.

Also:

How long do you expect or require the Beelink SER8 Mini PC to run on the AC2A UPS without any other immediate sources of power?

Have you read the AC2A User Manual ?

https://cdn.shopify.com/s/files/1/0..._AC2A_PLP013-6D03A2_23.11.23.pdf?v=1703745346

thanks for the opinion about the 20ms, was unsure yeah, and was trying to see if i could find some specifications on the mini pc online to figure it out

expect power blips to be short, well under an hr, so that shouldn't be issue

thanks for the manual link - will check out

===

I also remember reading that switching time is quicker if I dont use all 300w of the PPS ? the mini pc would only use around 60w