Bios update Stalled

[xcrossover]

Hi all,

I have an Asus z170k motherboard using windows 10. I have upgraded to the latest version via USB (downloaded from the Asus site and into usb as *.cap). When it was going thought the process and rebooted, it just went all black screen and you can hear the CPU fan going a hundred miles an hour. Left it for a few minutes and turned it off (via holding the power until it did) then when I restarted again to the bios page, it's sitting as a new bios version.

Question since it didn't reboot properly do I need to do it again? It seems to be working fine except for if I go to the Ai suite in windows the vcore values have gone red but the values moves between .7 to 1.2.

I'm not sure why the CPU core voltage values are red instead of standard white.

Thanks

 

[xcrossover]

bump

 

[GhislainG]

Did you reset the BIOS to the default values?

 

[xcrossover]

yes i did after update. seems to be working fine. just wondering if i need to reinstall or re run the bios update again? its only the asus AI 3 thats reporting it in red values of its vcore figures

 

[GhislainG]

If it's too high you can set it to the default value (Auto) or set it manually; it has to be just high enough to keep the CPU stable.

 

[xcrossover]

If it's too high you can set it to the default value (Auto) or set it manually; it has to be just high enough to keep the CPU stable.

i think its set to auto as the vcore values goes up and down.

 

[xcrossover]

https://ibb.co/kBGiVF

this is what my vcore values looks like. does it look normal?

 

[GhislainG]

Absolutely.

 

[xcrossover]

Absolutely.

Thanks.