Biostar MCP6P M2+ v6.1 + AMD ATHLON II X3 440

[ewokie]

Hi I new here and hoping for some help.
I want to install Windows 7 32 bit to this board.
Whats the recommended or best settings to use as I have 2Gb Memory and I will be using onboard graphics (dont do much gaming)
Also wanting to put Windows 7 on an IDE drive (main drive)
Run a 2nd SATA Drive for backup ie. files, documents etc.

-----------------------------

Biostar MCP6P M2+ v6.1 + AMD ATHLON II X3 440

 

[omnisome]

What do you mean by recommended settings?

 

[o1die]

I used that board for a few months; you don't need to use any special settings. I couldn't get it to overclock at all.

 

[ewokie]

Thanks for replying, dont want to overclock it.
But was asking if there was good seetings as I know some people had issues with the graphics memory in the bios etc.

 

[o1die]

This is a generic 6150se nvidia chipset board with directx 9 onboard graphics. You can use either 32 or 64 for the graphics setting in the bios; You don't want to use too much memory for the graphics since you only have 2 gb to work with.

 

[Guest]

i want to install windows 7 in mcp6p m2+ but i also need to installer of driver of motherboard ..
where ???
help me PLEASE ..
drivers for windows SP works on it. ???

 

[Thelaserjock]

i want to install windows 7 in mcp6p m2+ but i also need to installer of driver of motherboard ..
where ???
help me PLEASE ..
drivers for windows SP works on it. ???

Don't know if you received an answer to this or not. All current drivers for the MCP6P M2+ are on the BioStar website for Win 7 32-bit (x86) and 64-bit (x64)

http://www.biostar-usa.com/app/en-us/mb/driver.php?S_ID=370

if I understood your situation and question correctly, this link to the BioStar website will provide you what you need for Windows 7 drivers for the MCP6P M2+ MoBo.

The BIOS updates are listed here:
http://www.biostar-usa.com/app/en-us/mb/bios.php?S_ID=370