Question Black Screen after manufacturer screen after new ram install

[lykewyzehd]

I installed new RAM ( T-Force XTREEM aRGB 32GB (2 x 16GB) DDR4-3600 CL14) and keep getting a black screen with my cursor showing up after the manufacturer screen, weird thing is is after switching it back and forth between 1/3 and 2/4 slots like 5 times it worked until I restarted now nothing again and back to the black screen

Aorus X570 Elite Wifi
Ryzen 7 5800X
2070 Super
850W PSU

Any help would be greatly appreciated

 

[Bob.B]

I installed new RAM ( T-Force XTREEM aRGB 32GB (2 x 16GB) DDR4-3600 CL14) and keep getting a black screen with my cursor showing up after the manufacturer screen, weird thing is is after switching it back and forth between 1/3 and 2/4 slots like 5 times it worked until I restarted now nothing again and back to the black screen

Aorus X570 Elite Wifi
Ryzen 7 5800X
2070 Super
850W PSU

Any help would be greatly appreciated

If you can get into the bios disable xmp.....test.

 

[lykewyzehd]

If you can get into the bios disable xmp.....test.

It isn't even enabled also Everytime I get into the bios it says bios has been reset please check your settings, I'm not sure if this is normal after a RAM install or not

 

[lykewyzehd]

Just replaced my old ram and now it's still not working -_-

 

[Bob.B]

Just replaced my old ram and now it's still not working -_-

Just to get it out of the mix you might want to replace the bios bat.

Remove the bat and set it aside go to the store and buy a new one by the time you get back and replace the bat things should have had time to bleed off.

Power up and enter the bios make any needed adjustments.