Hello, I decided to upgrade my computer with a new graphics card and I figured why not throw it in a new case. So I re built the entire system and I am running into some problems. At first I was getting stuck with the DRAM LED stuck on but I managed to get past that by messing around with which ram and in which slots. Now I have a whole other problem. I am able to boot into the bios but it wont let me into windows even when selecting which drive to boot from.It is detecting the drive and ram but wont let me boot into into it.I have already looked through a lot of threads and solutions and havnt found one that worked for me. Right now I have removed the new graphics card and replaced with my old one so the setup is entirely the same as before just in a new case. I tried disabling secure boot,disabling fast boot,swapping sata ports and sata cables, tried with and without a graphics card. I'm sure there is plenty of other options but I don't know where to start. If any of you could give some suggestions it would be much appreciated.
System specs.
Asus z97-a
1070ti
4790k
Corsair ax1200 gold(overkill I know)
Vengeance 1333mhz ram 4x4gbs
Windows 7
Any other things that might help feel free to ask.
Thanks in advance.
System specs.
Asus z97-a
1070ti
4790k
Corsair ax1200 gold(overkill I know)
Vengeance 1333mhz ram 4x4gbs
Windows 7
Any other things that might help feel free to ask.
Thanks in advance.