Boot failure after overclock

[Hdffej]

Now I am getting a boot failure on restart.

The system has experienced a boot failure due to incorrect configuration. Previous settings in bios may not be compatible with current hardware state

Current cpu speed: 0.0mhz
Current bclk: 200.98mhz
Current memory speed: 1607.88

I am running an fx6300 with 8gb ram on a gigabyte 990fxa-ud3
Cooler master 212evo

Had what looked like a stable overclock at 4.3ghz @ 1.3v. Restarted and a blue screen came up with the above message. This is my first overclock so I'm not sure what's going on and can't seem to find anything. I have dialed it back to my last stable Oc of 4.2ghz @ 1.2975v

 

[Denis_43]

Hmmm i think you should get back stock overclock in bios.
Or set them to optimized defaults.

 

[Denis_43]

You shouldnt overclock the cpu it reduses life.
And you will get 6 fps max.
The blue screen means the cpu cant handle that much clocks.

 

[Hdffej]

I did that and it went away. I was looking for an overclocking solution. I am aware that it may shorten the life of the cpu but I am not concerned with that. With the over clock I have now I have noticed an increase in performance.

Thank you for your reply. I am looking for a different answer though I think

Jeff