Question Boot-failure with Zotac 2070s on Gigabyte Z390M Gaming board ?

[IvQueiroga]

Hey guys, i'm new here and have a question which I couldn't find answer to anywhere.

I have a gigabyte z390m gaming with i7 9700k and 16gb hyper x predator 3200. I'm using windows 11, btw.

My Zotac 2070s cant boot with this computer and i dont know why. It boots with my Rx 570, my 1660s, but dont, with my 2070s. At first, i thought it could be the gpu. But my second pc boots with it. Its a biostar b450 with an athlon.

A friend brought his pc so i could test with a 3rd system, a gigabyte mobo (dont remember model) with a r5 1600, and it booted. With my actual computer, the system looks to start, but i dont get video. Nothing at all. My monitor give No Signal from the very start, i cant see even the bios.

 

[Fix_that_Glitch]

What psu do you have?

 

[vargasbill]

Have you tried booting in legacy mode instead UEFI?

 

[IvQueiroga]

What psu do you have?

Evga 750 bq bronze

 

[IvQueiroga]

Have you tried booting in legacy mode instead UEFI?

Yeah, and nothing change

 

[vargasbill]

Have you tried it in another PCI-E port slot? Ypur Mobo has the latest BIOS? It's pretty weird since it is working in your second Mobo

 

[Fix_that_Glitch]

Have you tried with hdmi and display port separately? Try and turn off fast start.

 

[IvQueiroga]

Have you tried on another PCI-E slot? Ypur Mobo has the latest BIOS? It's pretty weird since is working in your second Mobo

You have no idea how weird it is.
I'v tried both pci (16 and x8). Tried gen 3 to one, speed. Tried changing my processor to a spare mobo, h310 that i have. Tried a low end psu that i have (600w bronze one from corsair).
My 2070s wont give screen with my intel processor (only piece that i diddnt change because i don have a 1151 spare processor) . System seems to boot, everything start, but i get black screen with No Signal (using hdmi or display port). I dont know how to proceed to keep debugging

 

[vargasbill]

You have no idea how weird it is.
I'v tried both pci (16 and x8). Tried gen 3 to one, speed. Tried changing my processor to a spare mobo, h310 that i have. Tried a low end psu that i have (600w bronze one from corsair).
My 2070s wont give screen with my intel processor (only piece that i diddnt change because i don have a 1151 spare processor) . System seems to boot, everything start, but i get black screen with No Signal (using hdmi or display port). I dont know how to proceed to keep debugging

In your second rig, does the GPU works well? I've seen that sometimes a black screen but PC booting can be some VRAM failure.

 

[Fix_that_Glitch]

I would put in one of your older gpus, and go to motherboard support site and install all of their vga/nvidia drivers and update any ime, chipset, bios drivers. Same with your monitor support site install any drivers it may have.