Question BOSD while playing CS2

[merk44n]

I am getting BOSD's while playing CS2 and like %80 of the time its in the exact second when a match ends. Here are my minidump files

https://www.dropbox.com/scl/fi/aoec...ey=ja2b2dearwvi5mmdum3rsn9gl&st=rpzh6kq2&dl=0

 

[lava2]

try to disable xmp from bios

 

[merk44n]

try to disable xmp from bios

I don't even have it on. I have 5600MHz ram but its running at 4800

 

[lava2]

what code you get on bsod, the is a code down called stop code? also see event viewer it also contain an error code failure

 

[merk44n]

what code you get on bsod, the is a code down called stop code? also see event viewer it also contain an error code failure

Already shared the minidump files. The codes are KMODE_EXCEPTION_NOT_HANDLED and DRIVER_IRQL_NOT_LESS_OR_EQUAL

 

[lava2]

Already shared the minidump files. The codes are KMODE_EXCEPTION_NOT_HANDLED and DRIVER_IRQL_NOT_LESS_OR_EQUAL

i can view your files, i get a message, Can’t load this file type also cant download, both errors indicate trouble with your network card, try to reinstall or update it, also if you have vpn, uninstall it, there is another stop code in the blue screen, what is it?

 

[ubuysa]

Looking at the three dumps as a whole I think that @lava2 was probably on the right track when they suspected RAM. Two of the three dumps show memory management operations in progress at the time of the bugcheck, although different operations were in progress. The third dump contains a misaligned instruction pointer - that's very often indicative of bad RAM.

In addition, there are no indications of third-party drivers being involved in any of these BSODs - that's another big clue that this is most likely a hardware problem.

There are two ways in which you can test your RAM...

Since you have more than one stick of RAM the most reliable way is to remove one stick and run on just one for a day or two - or until you get another BSOD. Then swap RAM sticks and run on just the other RAM stick for a day or two - or until you get another BSOD. This will clearly show whether one stick is flaky.

-or-

1. Download Memtest86 (free)
2. , use the imageUSB.exe tool extracted from the download to make a bootable USB drive containing Memtest86 (1GB is plenty big enough). Do this on a different PC if you can, because you can't fully trust yours at the moment.
3. Then boot that USB drive on your PC, Memtest86 will start running as soon as it boots.
4. If no errors have been found after the four iterations of the 13 different tests that the free version does, then restart Memtest86 and do another four iterations. Even a single bit error is a failure.

Note that no memory testing app can find 100% of RAM problems, whilst removing one stick can.