brake fluid on pickup rollers

G

Guest

Guest
Archived from groups: comp.periphs.printers (More info?)

I ran out of my Rubber Renew rubber softening
chemical and started using brake fluid as suggested
by some posters here. It seems like it works at
least temporarily. Any comments are welcome.
Ken
 
Archived from groups: comp.periphs.printers (More info?)

"ken smith" <kencom@videotron.ca> wrote:
>I ran out of my Rubber Renew rubber softening
>chemical and started using brake fluid as suggested
>by some posters here. It seems like it works at
>least temporarily. Any comments are welcome.
>Ken

If it works then great, but for anybody reading this one word of caution - it
probably damages plastic immediately and severely. Can you cofirm that Ken?
Certainly rubber rejuvenator detstroys plastic.
Tony
 
Archived from groups: comp.periphs.printers (More info?)

TONY DA TIGER IS IN DA BUSINESS

Tony wrote:

>"ken smith" <kencom@videotron.ca> wrote:
>
>
>>I ran out of my Rubber Renew rubber softening
>>chemical and started using brake fluid as suggested
>>by some posters here. It seems like it works at
>>least temporarily. Any comments are welcome.
>>Ken
>>
>>
>
>If it works then great, but for anybody reading this one word of caution - it
>probably damages plastic immediately and severely. Can you cofirm that Ken?
>Certainly rubber rejuvenator detstroys plastic.
>Tony
>
>
 
Archived from groups: comp.periphs.printers (More info?)

I haven't tried it on plastic. I know the fluid gets
on the drum but doesn't seem to do any harm
I'm just concerned that the fix may only
be temporary.
Ken

<Tony> wrote in message news😛art1of1.1.MYMv4bh#KFWAlw@ue.ph...
> "ken smith" <kencom@videotron.ca> wrote:
> >I ran out of my Rubber Renew rubber softening
> >chemical and started using brake fluid as suggested
> >by some posters here. It seems like it works at
> >least temporarily. Any comments are welcome.
> >Ken
>
> If it works then great, but for anybody reading this one word of caution -
it
> probably damages plastic immediately and severely. Can you cofirm that
Ken?
> Certainly rubber rejuvenator detstroys plastic.
> Tony
 
Archived from groups: comp.periphs.printers (More info?)

[
quote="Tony"]
If it works then great, but for anybody reading this one word of
caution - it
probably damages plastic immediately and severely. Can you cofirm that
Ken?
Certainly rubber rejuvenator detstroys plastic.
Tony

Perhaps what happens is, it does eat away the surface then becomming
'grippable' for a short limited time and the whole thing repeats
until there is nothing left..!

Remember well, one collegue using CarbonTetrachloride on a switch unit
in a small pocket radio - the plastic just disappeared, it was quite
comical watching his face watching it.

Davy
 
Archived from groups: comp.periphs.printers (More info?)

Brake fluid is very corrosive. This doesn't sound like a good
application for it.

ken smith wrote:
> I ran out of my Rubber Renew rubber softening
> chemical and started using brake fluid as suggested
> by some posters here. It seems like it works at
> least temporarily. Any comments are welcome.
> Ken
>
>
 
Archived from groups: comp.periphs.printers (More info?)

Yes, I have seen a plastic switch that melted when a colleague used a mix of
cleaning solvents. There are many types of plastic. The plastic parts that
hold
the rollers in place don't seem to be affected.


"Davy" <davecoe@blueyonder.co-dot-uk.no-spam.invalid> wrote in message
news😱ku_e.146162$CC2.141740@fe08.news.easynews.com...
> [
quote="Tony"]
> If it works then great, but for anybody reading this one word of
> caution - it
> probably damages plastic immediately and severely. Can you cofirm that
> Ken?
> Certainly rubber rejuvenator detstroys plastic.
> Tony
>
> Perhaps what happens is, it does eat away the surface then becomming
> 'grippable' for a short limited time and the whole thing repeats
> until there is nothing left..!
>
> Remember well, one collegue using CarbonTetrachloride on a switch unit
> in a small pocket radio - the plastic just disappeared, it was quite
> comical watching his face watching it.
>
> Davy
>
 
Archived from groups: comp.periphs.printers (More info?)

On Wed, 28 Sep 2005 00:17:47 -0000, Tony <> wrote:

>"ken smith" <kencom@videotron.ca> wrote:
>>I ran out of my Rubber Renew rubber softening
>>chemical and started using brake fluid as suggested
>>by some posters here. It seems like it works at
>>least temporarily. Any comments are welcome.
>>Ken
>
>If it works then great, but for anybody reading this one word of caution - it
>probably damages plastic immediately and severely. Can you cofirm that Ken?
>Certainly rubber rejuvenator detstroys plastic.
>Tony

You can also use Marvel Mystery oil.

Paul
Want to Fix Something?

http://www.manuals4you.com
 
Archived from groups: comp.periphs.printers (More info?)

FredFarkle wrote:
> On Wed, 28 Sep 2005 00:17:47 -0000, Tony <> wrote:
>
>
>>"ken smith" <kencom@videotron.ca> wrote:
>>
>>>I ran out of my Rubber Renew rubber softening
>>>chemical and started using brake fluid as suggested
>>>by some posters here. It seems like it works at
>>>least temporarily. Any comments are welcome.
>>>Ken
>>
>>If it works then great, but for anybody reading this one word of caution - it
>>probably damages plastic immediately and severely. Can you cofirm that Ken?
>>Certainly rubber rejuvenator detstroys plastic.
>>Tony
>
>
> You can also use Marvel Mystery oil.
>
> Paul
> Want to Fix Something?
>
> http://www.manuals4you.com
>
Thanks Fred! Nice site you've got there. Good info on it.
Thanks again.
Frank
 
Archived from groups: comp.periphs.printers (More info?)

Ken I am sure it is temporary, but temporary is a relative term.
I have seen pick up rollers rejeuvenated several times in a heavily used
printers life with great success but at some stage replacement may be necessary
as after a while some of them become spongy.
So long as it works keep doing it I guess.
Tony

"ken smith" <kencom@videotron.ca> wrote:
>I haven't tried it on plastic. I know the fluid gets
>on the drum but doesn't seem to do any harm
>I'm just concerned that the fix may only
>be temporary.
>Ken
>
><Tony> wrote in message news😛art1of1.1.MYMv4bh#KFWAlw@ue.ph...
>> "ken smith" <kencom@videotron.ca> wrote:
>> >I ran out of my Rubber Renew rubber softening
>> >chemical and started using brake fluid as suggested
>> >by some posters here. It seems like it works at
>> >least temporarily. Any comments are welcome.
>> >Ken
>>
>> If it works then great, but for anybody reading this one word of caution -
>it
>> probably damages plastic immediately and severely. Can you cofirm that
>Ken?
>> Certainly rubber rejuvenator detstroys plastic.
>> Tony
 
Archived from groups: comp.periphs.printers (More info?)

measekite <inkystinky@oem.com> wrote:
>This is a multi-part message in MIME format.
>
>
>Tony wrote:
>
>>Ken I am sure it is temporary, but temporary is a relative term.
>>I have seen pick up rollers rejeuvenated several times in a heavily used
>>printers life with great success but at some stage replacement may be
>>necessary
>>
>>
>*
>OF COURSE SO TONY DA TIGER CAN MAKE MONEY.*


Ken
Please send the money as agreed to inkystinky.com, my favourite charity (it
looks after backward chimpanzees and is run by a socially challenged orangutan).
the invoice is in the mail :)
Tony

>
>>as after a while some of them become spongy.
>>So long as it works keep doing it I guess.
>>Tony
>>
>>"ken smith" <kencom@videotron.ca> wrote:
>>
>>
>>>I haven't tried it on plastic. I know the fluid gets
>>>on the drum but doesn't seem to do any harm
>>>I'm just concerned that the fix may only
>>>be temporary.
>>>Ken
>>>
>>><Tony> wrote in message news😛art1of1.1.MYMv4bh#KFWAlw@ue.ph...

<SNIP>