I have a 2012 Intel S5520HC Server Board (Dual Xeon 5620 CPU’s, 96GB RAM) with an Embedded RAID Technology II Configuration Utility. There is one virtual drive configured, Array # 00, Mode RAID 1, Stripe Size 64KB, Two Stripes, and 1TB Drive Size.
I would be open to any suggestions in performing a clean Windows 10 Pro 1903 Update installation with a Samsung 860 EVO 2TB SSD RAID1 configuration or even better, break the RAID1 into only one logical 860 EVO 2TB SSD drive.
I am not having any difficulty performing a clean W10Pro installation with the existing Samsung Pro 1TB SSD RAID1 configuration and Windows 10 Pro 1903 Update ISO.
For some reason, Storage drivers are not recognizing the 2TB Samsung 860 EVO SSD during a clean Win 10 Pro installation when using a USB ISO Win Pr drive.
I removed one of the 1TB drives from the RAID1, replaced it with a 2TB 860 EVO SSD, and am now rebuilding the drive as if the removed drive was degraded. I plan on doing the same thing with the other 2TB 860 EVO drive. Does anyone have any suggestions? I have used MiniTool Partition Pro but was unsuccessful in performing a disk copy after the Fatal Error Blue Screen popped up when finished. My thought was that I may have to disable the USB bootup sequence.
I’m using this cpt as a backup server at my Optometric practice.
Thanks!
Stephen Hlis
I would be open to any suggestions in performing a clean Windows 10 Pro 1903 Update installation with a Samsung 860 EVO 2TB SSD RAID1 configuration or even better, break the RAID1 into only one logical 860 EVO 2TB SSD drive.
I am not having any difficulty performing a clean W10Pro installation with the existing Samsung Pro 1TB SSD RAID1 configuration and Windows 10 Pro 1903 Update ISO.
For some reason, Storage drivers are not recognizing the 2TB Samsung 860 EVO SSD during a clean Win 10 Pro installation when using a USB ISO Win Pr drive.
I removed one of the 1TB drives from the RAID1, replaced it with a 2TB 860 EVO SSD, and am now rebuilding the drive as if the removed drive was degraded. I plan on doing the same thing with the other 2TB 860 EVO drive. Does anyone have any suggestions? I have used MiniTool Partition Pro but was unsuccessful in performing a disk copy after the Fatal Error Blue Screen popped up when finished. My thought was that I may have to disable the USB bootup sequence.
I’m using this cpt as a backup server at my Optometric practice.
Thanks!
Stephen Hlis
Last edited: