bsod and ram issues

[Mark_moz]

Hi,

i face problems with frequent BSODs a lot these days, i have a feeling that it is because of the RAM i installed on my GA 78lmt usb3 Mobo,

i have 2x 4GB ddr3L alongside 2x 4GB ddr3( pre installed)... please dont get me wrong... but i read a lot of reviews about placing DDR3L alongside DDR3 sticks..
it worked fine for about 2 months until now....

should i change it back to DDR3?

 

[brispuss]

Test the memory by using ONE module at a time, and also try using the module in different memory slots. This will help in determining which module and/or which slot is faulty.

 

[Mark_moz]

Test the memory by using ONE module at a time, and also try using the module in different memory slots. This will help in determining which module and/or which slot is faulty.

hey thanks for a reply

if the slots are numbered 1234 from the cpu side.... then the order was DDR3L DDR3 DDR3L DDR3

works for sometime... but anything else is just causing bsod at the startup

 

[brispuss]

Tried ONE module at a time, and in different slots yet?

 

[Mark_moz]

Tried ONE module at a time, and in different slots yet?

YES... the slots are working...

 

[brispuss]

And all the modules are working also?

If so, try raising DRAM Voltage in BIOS by 0.05 V.